I’ve just uploaded to the arXiv my paper “Almost all Collatz orbits attain almost bounded values“, submitted to the proceedings of the Forum of Mathematics, Pi. In this paper I returned to the topic of the notorious Collatz conjecture (also known as the conjecture), which I previously discussed in this blog post. This conjecture can be phrased as follows. Let denote the positive integers (with the natural numbers), and let be the map defined by setting equal to when is odd and when is even. Let be the minimal element of the Collatz orbit . Then we have

Conjecture 1 (Collatz conjecture)One has for all .

Establishing the conjecture for all remains out of reach of current techniques (for instance, as discussed in the previous blog post, it is basically at least as difficult as Baker’s theorem, all known proofs of which are quite difficult). However, the situation is more promising if one is willing to settle for results which only hold for “most” in some sense. For instance, it is a result of Krasikov and Lagarias that

for all sufficiently large . In another direction, it was shown by Terras that for almost all (in the sense of natural density), one has . This was then improved by Allouche to , and extended later by Korec to cover all . In this paper we obtain the following further improvement (at the cost of weakening natural density to logarithmic density):

Theorem 2Let be any function with . Then we have for almost all (in the sense of logarithmic density).

Thus for instance one has for almost all (in the sense of logarithmic density).

The difficulty here is one usually only expects to establish “local-in-time” results that control the evolution for times that only get as large as a small multiple of ; the aforementioned results of Terras, Allouche, and Korec, for instance, are of this type. However, to get all the way down to one needs something more like an “(almost) global-in-time” result, where the evolution remains under control for so long that the orbit has nearly reached the bounded state .

However, as observed by Bourgain in the context of nonlinear Schrödinger equations, one can iterate “almost sure local wellposedness” type results (which give local control for almost all initial data from a given distribution) into “almost sure (almost) global wellposedness” type results if one is fortunate enough to draw one’s data from an *invariant measure* for the dynamics. To illustrate the idea, let us take Korec’s aforementioned result that if one picks at random an integer from a large interval , then in most cases, the orbit of will eventually move into the interval . Similarly, if one picks an integer at random from , then in most cases, the orbit of will eventually move into . It is then tempting to concatenate the two statements and conclude that for most in , the orbit will eventually move . Unfortunately, this argument does not quite work, because by the time the orbit from a randomly drawn reaches , the distribution of the final value is unlikely to be close to being uniformly distributed on , and in particular could potentially concentrate almost entirely in the exceptional set of that do not make it into . The point here is the uniform measure on is not transported by Collatz dynamics to anything resembling the uniform measure on .

So, one now needs to locate a measure which has better invariance properties under the Collatz dynamics. It turns out to be technically convenient to work with a standard acceleration of the Collatz map known as the *Syracuse map* , defined on the odd numbers by setting , where is the largest power of that divides . (The advantage of using the Syracuse map over the Collatz map is that it performs precisely one multiplication of at each iteration step, which makes the map better behaved when performing “-adic” analysis.)

When viewed -adically, we soon see that iterations of the Syracuse map become somewhat irregular. Most obviously, is never divisible by . A little less obviously, is twice as likely to equal mod as it is to equal mod . This is because for a randomly chosen odd , the number of times that divides can be seen to have a geometric distribution of mean – it equals any given value with probability . Such a geometric random variable is twice as likely to be odd as to be even, which is what gives the above irregularity. There are similar irregularities modulo higher powers of . For instance, one can compute that for large random odd , will take the residue classes with probabilities

respectively. More generally, for any , will be distributed according to the law of a random variable on that we call a *Syracuse random variable*, and can be described explicitly as

where are iid copies of a geometric random variable of mean .

In view of this, any proposed “invariant” (or approximately invariant) measure (or family of measures) for the Syracuse dynamics should take this -adic irregularity of distribution into account. It turns out that one can use the Syracuse random variables to construct such a measure, but only if these random variables stabilise in the limit in a certain total variation sense. More precisely, in the paper we establish the estimate

for any and any . This type of stabilisation is plausible from entropy heuristics – the tuple of geometric random variables that generates has Shannon entropy , which is significantly larger than the total entropy of the uniform distribution on , so we expect a lot of “mixing” and “collision” to occur when converting the tuple to ; these heuristics can be supported by numerics (which I was able to work out up to about before running into memory and CPU issues), but it turns out to be surprisingly delicate to make this precise.

A first hint of how to proceed comes from the elementary number theory observation (easily proven by induction) that the rational numbers

are all distinct as vary over tuples in . Unfortunately, the process of reducing mod creates a lot of collisions (as must happen from the pigeonhole principle); however, by a simple “Lefschetz principle” type argument one can at least show that the reductions

are mostly distinct for “typical” (as drawn using the geometric distribution) as long as is a bit smaller than (basically because the rational number appearing in (3) then typically takes a form like with an integer between and ). This analysis of the component (3) of (1) is already enough to get quite a bit of spreading on (roughly speaking, when the argument is optimised, it shows that this random variable cannot concentrate in any subset of of density less than for some large absolute constant ). To get from this to a stabilisation property (2) we have to exploit the mixing effects of the remaining portion of (1) that does not come from (3). After some standard Fourier-analytic manipulations, matters then boil down to obtaining non-trivial decay of the characteristic function of , and more precisely in showing that

for any and any that is not divisible by .

If the random variable (1) was the sum of independent terms, one could express this characteristic function as something like a Riesz product, which would be straightforward to estimate well. Unfortunately, the terms in (1) are loosely coupled together, and so the characteristic factor does not immediately factor into a Riesz product. However, if one groups adjacent terms in (1) together, one can rewrite it (assuming is even for sake of discussion) as

where . The point here is that after conditioning on the to be fixed, the random variables remain independent (though the distribution of each depends on the value that we conditioned to), and so the above expression is a *conditional* sum of independent random variables. This lets one express the characeteristic function of (1) as an *averaged* Riesz product. One can use this to establish the bound (4) as long as one can show that the expression

is not close to an integer for a moderately large number (, to be precise) of indices . (Actually, for technical reasons we have to also restrict to those for which , but let us ignore this detail here.) To put it another way, if we let denote the set of pairs for which

we have to show that (with overwhelming probability) the random walk

(which we view as a two-dimensional renewal process) contains at least a few points lying outside of .

A little bit of elementary number theory and combinatorics allows one to describe the set as the union of “triangles” with a certain non-zero separation between them. If the triangles were all fairly small, then one expects the renewal process to visit at least one point outside of after passing through any given such triangle, and it then becomes relatively easy to then show that the renewal process usually has the required number of points outside of . The most difficult case is when the renewal process passes through a particularly large triangle in . However, it turns out that large triangles enjoy particularly good separation properties, and in particular afer passing through a large triangle one is likely to only encounter nothing but small triangles for a while. After making these heuristics more precise, one is finally able to get enough points on the renewal process outside of that one can finish the proof of (4), and thus Theorem 2.

## 270 comments

Comments feed for this article

10 September, 2019 at 8:40 am

goingtoinfinityWhat is the relations between results for “almost all” cases vs. subsequent proofs of the full result, from historic examples? Are there good examples where the former influences the developments of the later? Or is it more common that, proving results for full results of a mathematical question, is conducted in an entirely different way usually?

As an example, Falting’s proof that there are only finitely many solutions to Fermat’s Last Theorem — did his techniques influence and appear in Wiles’s/Taylor’s final proof?

10 September, 2019 at 9:10 am

Terence TaoOne can broadly divide arguments involving some parameter (with a non-empty range) into three types: “worst case analysis”, which establish some claim for all choices of parameters; “average case analysis”,which establish some claim for almost all choices of parameters; and “best case analysis”, which establish some claim for at least one choice of parameters. (One can also introduce an often useful variant of the average case analysis by working with “a positive fraction” of choices rather than “almost all”, but let us ignore this variant for sake of this discussion.) There are obvious implications between the three: worst case analysis results imply average case analysis results (these are often referred to as “deterministic arguments”), and average case analysis results imply best case analysis results (the “probabilistic method”). In the contrapositive, if a claim fails in the average case, then it will also fail in the worst case; and if it fails even in the best case, then it fails in the average case. However, besides these obvious implications, one generally sees quite different methods used the three different types of results. In particular, average case analysis (such as the arguments discussed in this blog post) gets to exploit methods from probability (and related areas such as measure theory and ergodic theory); best case analysis relies a lot on explicit constructions to design the most favorable parameters for the problem; but worst case analysis is largely excluded from using any of these methods, except when there is some “invariance”, “dispersion”, “unique ergodicity”, “averaging” or “mixing” property that allows one to derive worst-case results from average-case results by showing that every worst-case counterexample must generate enough siblings that at they begin to be detected by the average-case analysis. For instance, one can derive Vinogradov’s theorem (all large odd numbers are a sum of three primes) from a (suitably quantitative) almost all version of the even Goldbach conjecture (almost all even numbers are the sum of two primes), basically because a single counterexample to the former implies a lot of counterexamples to the latter (see Chapter 19.4 of Iwaniec-Kowalski for details). At a more trivial (but still widely used) level, if there is so much invariance with respect to a parameter that the truth value of a given property does not actually depend on the choice of parameter, then the worst, average, and best case results are equivalent, so one can reduce the worst case to the best case (such arguments are generally described as “without loss of generality” reductions).

However, in the absence of such mixing properties, one usually cannot rigorously convert positive average case results to positive worst case results, and when the worst case result is eventually proved, it is often by a quite different set of techniques (as was done for instance with FLT). So it is often better to think of these different types of analysis as living in parallel, but somewhat disjoint, “worlds”. (In additive combinatorics, there is a similar distinction made between the “100% world”, “99% world”, and “1% world”, corresponding roughly to worst case analysis and the two variants of average case analysis respectively, although in this setting there are some important non-trivial connections between these worlds.) In the specific case of the Collatz conjecture, the only obvious invariance property is that coming from the Collatz map itself ( obeys the Collatz conjecture if and only if does), but this seems too weak of an invariance to hope to obtain worst case results from average case ones (unless the average case results were really,

really, strong).11 September, 2019 at 4:42 am

BuzzmanLet and denote the odd and even parities, respectively, of the terms in the Collatz orbit , where . Define such that

,

where with the floor function being a stopping time criterion. Parenthetically, one can also express taking . Then a simple proposition for satisfying the “almost all” argument, in the sense that , is of the form

,

where as . Observe that decomposes into probability for even and for odd. The same argument applies for if one takes . Exceptional cases are due mostly to or when such are iterates of .

11 September, 2019 at 7:15 am

suitably impressedThat’s a wonderfully clarifying set of remarks, that deserves promotion to a blogpost of its own.

14 September, 2019 at 9:39 am

random readerIn addition to Terry’s (amazing) remarks on worst vs average case, the methodological distinctions between qualitative vs quantitative, and constructive vs nonconstructive, are further dividing lines that are predictive of when the proof of a weaker result can be re-used in a proof of a stronger result.

As in the worst vs average, unless there is some transference principle to go from one side of the divide to the other, methods and results on the weak side will typically be dis-similar to those on the strong side.

The example of Faltings’ theorem (Mordell conjecture) was a good one. It is a qualitative result, finite number of rational points, with no bound on the size of the solutions. Finding all of the rational points on specific curves, and proving that those are all the solutions, is superficially a similar problem but in practice uses different techniques than Faltings.

14 September, 2019 at 11:17 am

Terence TaoOne further addendum: even when there are no direct transference results between different “worlds” of result types, and even when the methods of proof in different worlds are quite distinct, one can still use the

relativedifficulty between results in one world as a predictor of the relative difficulty in another world. For instance, suppose that two similar-looking statements and , with the “almost all” versions of both and known, but the “all” versions of both statements not known, then there may be no way to transfer the almost all theorems and methods to the all setting. But if the almost all version of was more difficult to establish than the almost all version of , then it is then reasonable to predict that the “all” version of will similarly be more difficult to establish than the “all” version of .14 September, 2019 at 12:16 pm

random readerTo formalize: comparative difficulty tends to transfer along (both the horizontal and vertical directions of) the commutative diagrams we call “analogies”.

Speaking of transference principles, having arbitrarily slow unbounded functions seems similar to the principle in nonstandard analysis that infinite (nonstandard) objects are equivalent to unbounded sequences of finite/standard objects, e.g., over/under-spill, or the translation between nonstandard and epsilon-delta definitions in calculus. Here there is no obvious transference from arbitrarily good almost-everywhere asymptotic bounds to a finite bound holding a.e., but are there similar situations in analysis where the finite a.e. statement (the equivalent in this context of “almost all integers go to 1 under the Collatz iteration”) is actually known to be false?

14 September, 2019 at 6:00 pm

Terence TaoOne can easily cook up examples. For instance, for any function that goes to infinity, one can easily show (using the Weyl equidistribution theorem) that for almost all (in the sense of natural density), where is the fractional part of , but there is no bound such that for almost all . (Instead, the previous claim is equivalent to the assertion that for each bound , the bound holds for a set of of density that depends on , but goes to 1 as .)

14 September, 2019 at 1:47 pm

random readerThis is turning into a very interesting side discussion making (somewhat) precise what is normally unwritten folk wisdom. To that end I’ll add an addendum to Terry’s addendum on relative difficulty.

The informal judgement that result X is harder to prove than related (e.g., weaker) result Y, often rests on the use of particular advanced tools as modules in the proof of X and not Y. Typical examples:

X requires explicit error estimates in the prime number theorem (or some analytic property of the Riemann zeta function), but Y only uses the infinitude of prime numbers.

X uses the Weil conjectures or things only known to follow from those, but Y only uses Lang-Weil estimates for the number of points on varieties mod p.

X uses the classification of finite simple groups, Y uses basic representation theory of finite groups.

X uses algebraic K-theory, Y uses De Rham cohomology on smooth manifolds.

In many cases of this sort, the machinery used in X is a black box, effectively an extra set of axioms. So X is from this point of view a result in a stronger formal system (as long as one does not resort to re-proving from scratch results equivalent to the black box) than the one used to prove Y, and the comparison of difficulty becomes similar to that of results proved with and without a particular axiom (e.g., the Axiom of Choice, or Excluded Middle). This makes the comparison closer to the constructive/nonconstructive distinction, polynomial vs exponential time for algorithms, and independence results in logic where the weaker system simply cannot prove a particular theorem. Also, there is often a sort of “reverse mathematics” where a cluster of X-like results all imply or are implied by the advanced module used to prove X (analogous to the polynomial reductions in NP completeness), or are equivalent to each other, giving evidence that the heavy machinery is really necessary.

28 December, 2019 at 5:28 pm

michaelmrossNevertheless, the foundation of the conjecture is facile:

“All 3x+1 sequence steps for odd ns are equivalent to multiplication by 0.25, 0.75, and 1.5 for n + 1 or n – 1.”

https://www.quora.com/Is-the-Collatz-conjecture-trivial/answer/Michael-M-Ross

28 December, 2019 at 9:36 pm

AnonymousYour Quora answer is nonsense

29 December, 2019 at 6:39 am

michaelmross“Utter nonsense”, said Wittgenstein of Cantor :)

29 December, 2019 at 3:41 pm

AnonymousSounds like a fair comparison to me

10 September, 2019 at 11:29 am

PeteTo give a different viewpoint..

Today, immediately after you conjecture ‘all X satisfy..’ you would want to at least heuristically convince yourself that your conjecture holds for almost all X (ideally with a few different random models).

But suppose you prove ‘almost all X’ for some reasonable random model. Is this good evidence that ‘all X’? Well, for a (obviously stupid) example, you might conjecture every -vertex graph with minimum degree is Hamiltonian. This is false – but true a.a.s. for a bunch of natural random models. The proofs that the random models are a.a.s. Hamiltonian, though, use the randomness in a very essential way.

On the other hand, suppose I prove that ‘all X such that horrible structural condition’. If ‘horrible structural condition’ happens to hold for almost all X (for some reasonable model) then I’m likely to title my paper ‘Almost all X…’ simply because it sells better. Such a proof quite possibly could be useful in a proof of ‘all X’; maybe later I (or someone) can weaken the horribleness and deal with the remaining cases.

Short version: no rigorous connection, but if you look at the proof of ‘almost all’ you may sometimes find it is useful.

7 October, 2019 at 3:59 pm

not all graphs are like thatRandom (“almost all”) behavior rarely predicts extremal (“all”) behavior for graphs, unlike the situation in number theory.

For the integers the random models of primes, Diophantine equations, Collatz, class groups, etc are all pretty good at making predictions that seem correct empirically and can sometimes be proved by (much harder) deterministic methods. Often even a very naive model is informative, as in the discussion in this comment section of whether “negative drift” is potentially enough to make general Collatz type iterations go bounded.

The extremal problems for graphs maybe resemble more the “irregularity of distribution” questions for primes, i.e., how far can things diverge from the predictions of the random model.

28 December, 2019 at 11:12 am

JacksonI have created the proof for this. I tried email professors, but no response. If you have suggestions, let me know.

10 September, 2019 at 11:17 am

omarleoblogThe teorem of the conjecture is very awesome. Maybe because the teorem has a lot of results.

10 September, 2019 at 12:13 pm

Terry Tao partial results on Collatz conjecture[…] Tao announced today that he has new partial results toward proving the Collatz conjecture. His blog post and arXiv paper are both entitled “Almost all Collatz orbits attain almost bounded […]

10 September, 2019 at 12:45 pm

Частичные результаты Терри Тао о гипотезе Коллатца {/} For coders {}[…] результаты в доказательстве гипотезы Коллатца. Его Сообщение блога а также бумага arXiv оба имеют название «Почти все […]

10 September, 2019 at 2:22 pm

AnonymousIt seems that in the summands of (2) a second probability symbol is missing.

[Corrected, thanks – T.]10 September, 2019 at 5:17 pm

Anonymous“in the sense of logarithmic density”

I do not understand this. Could you please explain this?

10 September, 2019 at 8:17 pm

Lior SilbermanLet be a set of positive integers. We measure its “natural density” as follows: we impose a cutoff , and ask: “what proportion of integers up to are contained in ?”. If this proportion tends to a limit as we say that the “natural density” of is . In symbols

This notion of “density” gives each integer an equal weight. We can define a new notion of “size” by giving the integer the weight . We would then measure the “proportion” of the interval occupied by by the following fraction:

Suppose now that this ratio tends to a limit as . Note that the denominator (a partial sum of the harmonic series) is very close to . We therefore have

This limit (if it exists) is called the “logarithmic density” of (note the logarithm in the denominator).

10 September, 2019 at 8:39 pm

Alex JonesFix a property that a positive integer might have. Say if has property and otherwise. It is said that almost all positive integers (w.r.t. logarithmic density) have property if .

10 September, 2019 at 8:25 pm

Lior SilbermanOn page 2 of the paper (definition of logarithmic density) you have “for all where you probably mean “for all .

[Thanks, this will be corrected in the next revision of the ms. -T]10 September, 2019 at 9:29 pm

AnonymousThank you for your reply !

10 September, 2019 at 10:39 pm

BuzzmanYour formulation takes if is odd and if is even. There should be appropriate clarification when citing previous results based on if is odd.

11 September, 2019 at 1:24 pm

Terence TaoI refer to this acceleration of the Collatz map as in the paper. It is not difficult to see that for all , so all the results in the literature concerning hold without any changes if one works with instead.

11 September, 2019 at 8:12 pm

BuzzmanI see now. And I can only smile at how shallow I can be, but always fervent at learning your depth. Thanks.

11 September, 2019 at 3:27 am

AnonymousIt seems that in definition 1.2 In the arXiv paper, should be

[This will be corrected in the next revision of the ms, thanks -T.]11 September, 2019 at 4:15 am

AnonymousIn definition 1.7 it seems clearer to replace by the strict inequality

[This will be corrected in the next revision of the ms, thanks -T.]11 September, 2019 at 7:17 am

DavidIt would obviously be nice to extend the result to showing that was bounded on almost all integers. Having toyed around with this result for a bit, it seems that you clearly can’t have a positive logarithmic density subset on which limits to infinity (because then you can set and some element will have to be bounded by its own value.)

However, it feels hard to construct such a set even if you assume the stronger result for a contradiction. Is there a good reason for an obstruction to this method?

11 September, 2019 at 7:36 am

DavidMore specifically, are there well known examples of functions of which are not bounded (more weakly) on any subset of positive density or (more strongly) on almost all integers and yet have no positive density subsets on which the function goes to infinity?

11 September, 2019 at 1:44 pm

Terence TaoIf there is no set of positive density on which a function is bounded, then for each threshold , the set must necessarily be of zero density, and a standard diagonalisation argument then shows that outside of a set of density zero.

11 September, 2019 at 1:37 pm

Terence TaoThis is discussed in Remark 1.4 of the paper. The best one seems to be able to do with the methods in the paper is to show that for each , one has for a set of positive integers of logarithmic density for some absolute constant (though there is some hope of reducing the error a bit). In particular, for sufficiently large , one can show for a positive logarithmic density set of integers; in principle, this could be combined with a numerical verification of cases up to to obtain the result that the Collatz conjecture held for a set of positive logarithmic density. (Thanks to Ben Green for pointing out this possibility to me.) Unfortunately the value of produced by the arguments in my paper, while in principle explicit, are almost certainly too enormous for this strategy to be easily implemented, but perhaps some variant of the methods in my paper could be used to achieve this.

11 September, 2019 at 12:59 pm

David Lowry-DudaI haven’t had the time to work out the details, but it seems to me that much of what you’ve written would apply for something like the 5n+1 variant of the Collatz conjecture. I wonder if it is also true that almost all (5n+1)-collatz orbits attain almost bounded values?

I think this would be a bit interesting since it is believed that there are orbits in the (5n+1)-collatz problem that get arbitrarily large.

Does this happen to be something you have thought about?

11 September, 2019 at 1:33 pm

Terence TaoThe argument relies in many places on the inequality , to ensure that the Collatz iterations have average negative logarithmic drift. Since , I would instead expect the reverse to be true for the map, namely that almost all iterates would escape to infinity. (Unfortunately the method of proof in this paper won’t extend to this case, as the probability measures are now being stretched into ever larger regions of space rather than being compressed into ever smaller regions, and one can’t hope to keep the probability measures stable in total variation in the former case.)

11 September, 2019 at 5:00 pm

David Lowry-DudaAha, I understand. Thank you.

14 September, 2019 at 7:31 am

oculus driftIs the negative-drift condition enough to get the same type of result for generalized Collatz recursions (finite partition of N into arithmetic progressions with a linear function on each progression)? i.e. if the map heuristically pulls integers toward 1 on average, then the almost everywhere quasi-boundedness holds. It’s hard to hope for anything more than that, and the statement is not so strong as to contradict the undecidability of such recursions in general.

14 September, 2019 at 8:33 am

Terence TaoThis is a very good question. One has to be careful however to define “negative drift” properly – a naive definition can give incorrect predictions. For instance, consider the map that sends when , and when for . A typical number has a 90% chance of being reduced in size by 10 by this map, and a 10% chance of doubling, which would naively suggest a negative drift, but in fact pretty much all orbits get sent to infinity, because they almost certainly meet the residue class at some point, at which point they grow exponentially.

Perhaps to define negative drift properly one has to define the dynamics on the profinite integers instead of the natural numbers (actually one should not need to use all primes here, only the primes that show up in the modulus of the residue classes and in the linear coefficient of the affine maps should be relevant, for instance for Collatz it is the dynamics on which is relevant). If the dynamics on maps Haar measure towards an ergodic invariant probability measure then one can then define the drift to be the mean value of with respect to this measure, and one could tentatively conjecture that the results of my paper would extend to any dynamics with an ergodic limiting measure with negative drift. For instance in the case of Syracuse the attracting measure on is the law of , where (in the notation of the paper) are independent random variables with the laws of respectively; if one includes other primes then one just adds on independent copies of . Here the drift is . (If one uses the original Collatz map rather than the Syracuse acceleration then the invariant measure is somewhat more complicated to describe; roughly speaking it is , where is a non-normalised uniform probability kernel on the natural numbers independent of , conditioned to the event for a geometric random variable independent of all previous variables.) By the ergodic theorem, negative drift would imply that almost all profinite integers would exhibit orbits whose cumulative linear multiplier would go to zero in the Archimedean sense, which would heuristically support almost all orbits becoming bounded.

One interesting question would be to see if one can construct an iteration that had negative drift in the above sense, but which still had at least one unbounded orbit. I don’t think the Conway-style FRACTRAN iterations can achieve this, but perhaps some more subtle variant of them can.

14 September, 2019 at 10:34 am

random readerThe nondegeneracy condition seems to be that the associated finite Markov chain has a single ergodic component (ie., strongly connected subgraph of recurring states) and then the contraction/expansion factor should be the same as on the adelic thing. I am assuming here that, taking N = product of all the primes (each to the largest power it occurs in the congruence moduli, numerators and denominators of the linear maps), there is a suitable and not too complicated sense in which the iteration is a Markov chain whose states are “randomly chosen integers in one residue class mod N”, which would be a restatement and formalization of the probability heuristic, and then to use that chain to calculate the contraction factor.

Assuming that this could be done, is it plausible that your methods adapt without major new ideas to the general iteration, or are they tied in some way to the map being 3x+1?

A related question (to assess dependence on 3x+1 versus variants with the same contraction factor) is the adversarial 3x+1 problem. The Collatz iteration, but sometimes changed to 3x+A where A is chosen each time from a given finite set of alternatives (such as anything from -10 to +10). If an adversary can change 100 percent, or 1 percent, or O(log n), of the applications of 3x+1 to (3x+A)’s, can it force the iteration to go unbounded? If the adversary always has enough freedom to force divergence, is that still true if the choices of A’s are require to equal, in average, the A in the iteration (such as +1 for Collatz) or to concentrate suitably around that number?

14 September, 2019 at 5:50 pm

Terence TaoI think it would be non-trivial, but perhaps possible, to extend the arguments in this paper to this more general setting. The original Collatz problem has a nice property that I rely on somewhat heavily in my paper, namely that the iteration is controlled entirely by the 2-adic nature of the starting point, but the irregularities of distribution caused by the iteration only manifests in the 3-adic statistics. (In particular, there is a key use of the Chinese remainder theorem in the proof of Lemma 5.2 that basically relies on this decoupling between the controlling coordinates and the irregularly distributed coordinates.) For more general Collatz-type systems this would not be the case and the analysis may become somewhat more difficult (though perhaps not completely intractable).

I would imagine that an adversarial model could flip a negative drift model such as the original Collatz to a positive drift one given enough options available to the adversary, which would provide heuristic justification at least for unbounded orbits.

14 September, 2019 at 6:58 pm

random readerThanks for that inspiring answer (and the blog that makes such Q & A possible). It sounds like either the full generalization is attainable, or there are very interesting things to learn about the decoupling property and its extensions and possible role as a (dis)obstruction.

14 September, 2019 at 11:41 pm

Alberto IbañezDespite having no prestige to lose, I do not want to interfere in your great work with my comments of, surely, low quality, but in turn, I think it is time to try to expose my intuitions about the conjecture. When you talk about “nondegeneracy condition” it is because the conjecture avoids this condition or seeks it. I say this because if it is possible to represent the binary relations of the function in some way, we would obtain an infinite Boolean matrix, and apparently, it must be singular or degenerate. “Singular matrices are rare in the sense that a square matrix randomly selected from a continuous uniform distribution on its entries will almost never be singular.” (Wikipedia).If this is so, and if the conjecture is true, it is precisely because the function 3n + 1, and apparently perhaps only it, manages to avoid the kind of residue 0 mod 3 and at the same time from an initial N, also manages to avoid the residue class 0 mod N.If this is so, and if the conjecture is true, it is precise because the function 3n + 1, and apparently perhaps only it, manages to avoid the kind of residue 0 mod 3 and at the same time from an initial N, also manages to avoid the residue class 0 mod N. These characteristics prevent get trapped in a periodic orbit. In the 5n + 1 conjecture, we know that certain numbers fall into periodic orbits and, I don’t know if by chance, but at least a multiple of 3 is involved. Perhaps this condition is what makes it impossible for any multiple of 3 to fall into a periodic orbit, and perhaps the truth of the conjecture is here because it is the multiples of 3 that enable the possibility of entering a periodic orbit.

Maybe I extend too much, but I want to take the opportunity to ask if Professor Tao’s strategy would change if instead of using mod 3 ^ n, would use mod N, where N is the starting point, to see if zero residue mod N is avoided.

Another question I wanted to ask is whether it is interesting or possible to try to prove that if we assume that no N falls into a periodic orbit, it could be shown that no N escapes to infinity, and therefore the truth of the conjecture would depend solely on demonstrating that no it is possible to fall into a periodic orbit. Thanks.

11 September, 2019 at 11:10 pm

AnonymousDear Sir.Tao,

Thanks you very much,

We are in a math conference in our country now. We are talking about you very much. We expect you have a hattrick in September, 2019 with Twin primes conjecture, Goldbach conjecture beside above Collatz conjecture.

Best wishes,

11 September, 2019 at 3:50 pm

Ridiculous AmateurI’m an amateur who didn’t take any math beyond undergrad and so *surely* I will embarass myself here, but I’ve come back to Collatz a lot over the years and I always feel like I’m stumbling somewhere near the answer.

If we can show that repeated application of Col() to any N > 1 will always eventually produce an integer < N (‘reduce’), that removes both the possibility of any other orbits and the possibility of unbounded growth in one go. Easier said than done, but that one property is all we need.

So what I do next is start carving up N into constructible categories that reduce, thereby chipping away at the space where a counterexample could exist.

Obviously even N reduce immediately and need no further consideration.

Fairly trivially, N of the form 4k+1 reduce in 3 applications of Col(), since 4k+1 is necessarily odd, 3 * (4k+1) + 1 = 12k + 4 which is divisible by 4 and so halves twice to yield 3k + 1. 3k + 1 > 4k + 1, so we reduce.

That’s now 3/4 of all N that reduce! Wow, we’re really cooking! Duh, the constructions get hairier from here, but there’s still a pattern hiding in there.

Skipping over the repeated applications and just listing some reductions with (the proportion of N now shown to reduce) and [H]alve and [M]ultiply sequence, we have:

2k -> k (1/2)[H]

4k + 1 -> 3k + 1 (3/4) [MHH]

16k + 3 -> 9k + 2 (13/16) [MHMHHH]

32k + 11 -> 27k + 10 (27/32) [MHMHHMHH]

32k + 23 -> 27k + 20 (28/32) [MHMHMHHH]

128k + 7 -> 81k + 5 (113/128) [MHMHMHHMHHH]

128k + 15 -> 81k + 10 (114/128) [MHMHMHMHHHH]

This is hardly comprehensive, but continuing to fill these out will inch us closer and closer to showing ‘all N’ reduce and if along the way somebody sees a hidden relation or pattern we can close the whole thing.

What I see is that the power of 2 acts as the left-hand coefficient and represents the number of ‘halving’ applications of Col() and the right hand power of 3 is the ‘multiplying’ applications of Col(). We know the power of 2 is always such that the result is greater than the power of 3 on the other side. Any less and it wouldn’t be a reduction, any more and we would have ‘passed’ the reduction.

This means some powers of 2 will never show up, because there’s no available power of 3 for them to reduce. Any 8k + x is more-than-reduced from a 3k + y form, and insufficient to reduce a 9k + y form.

So we can trace out the ‘possible’ forms by examining the relationship between growth of powers of 2 and 3. We know how many M/H operations will happen and it’s only the order that can change.

The possible orderings are bounded by needing to always follow M with H and needing to ‘spread out’ the H operations so as to not overcome the M until the end. The k term remains even until the final application of Col().

So that leaves the constant term to ‘select’ the order within the valid options – or the order to select the constant, however you want to view it.

Even if this approach *doesn’t* reveal any fundamental truth or provide unique insight to solve the problem, it *does* allow a computer program to very quickly prove an arbitrary fraction of possible N reduce, which is much better than counting and testing individual numbers.

12 September, 2019 at 4:06 am

Terence TaoI think you may be on your way to rediscovering the arguments and results of Terras (link to article here). In the language of this blog post or my paper, the conclusion is that for almost all (in the sense of natural density). It is true that if one could in fact show that for

all(not just almost all), this would resolve the Collatz conjecture, but this is one of these situations where there seems to be an enormous gap in difficulty between “almost all” results and “all” results.14 September, 2019 at 12:14 am

AnonymousSuppose that a function from into itself has the property that if then Collatz conjecture would follow. Is the smallest function with this property?

[It appears that your comments are being parsed incorrectly due to the use of < and > symbols that are parsed as HTML tags. Use < and > instead -T.]14 September, 2019 at 12:43 am

AnonymousSomehow (perhaps because of the symbol 1$ can be relaxed to a function while still implying the Collatz conjecture?

Is it possible that there is such whose growth is faster(!) than N?

[It appears that your comments are being parsed incorrectly due to the use of < and > symbols that are parsed as HTML tags. Use < and > instead -T.]14 September, 2019 at 9:18 am

AnonymousSuppose that a function has the property that for all implies Collatz conjecture. Is there such (with this property) whose growth to infinity is faster than ?

14 September, 2019 at 9:57 am

Terence TaoWell, one trivially has the bound , so this question is equivalent to the full Collatz conjecture.

18 September, 2019 at 2:04 am

Alberto IbañezThe difference between “almost all” and “all” , can be infinite or can you establish that there is a finite number of counterexamples? I say it because if there is an orbit that escapes to infinity, it has infinite n odd ones, in addition to its 2 multiples. But if you can be established that the number of counterexamples must be finite, there can be no orbits that escape to infinity.

18 September, 2019 at 4:41 am

JefBack to 3x-1, what percentage of the natural numbers map to 1 as opposed to 5 and 17 combined?

18 September, 2019 at 9:23 am

CraigDoing a quick spreadsheet calculation, I found that for the 3x-1 conjecture, of all numbers from 1 to 10,000, 3,244 numbers eventually reach 1, 3,213 numbers eventually reach 5, and 3,543 numbers eventually reach 17.

So it’s about one third going to 1, one third going to 5, one third going to 17.

18 September, 2019 at 11:33 am

Alberto IbañezDear Jef. I liked to study the 5n + 1 variant to know why the conjecture fails, especially as regards the periodic orbits. The orbits that escape to infinity do not understand them very well, although both, seen from the inverse maps, apparently are orbits, or numbers, that are not generated from 1, so they never reach 1, from the original map. I have not studied the 3n-1 map, but I understand that it fails like 5n + 1, or is it interesting for something else other than being the original with the changed sign?

19 September, 2019 at 5:36 am

JeffAlberto,

Crandall’s 1978 paper in Mathematics of Computation has what you are looking for. His qx+1 problem.

You’ll see cycles correspond with solutions to Diophantine equations.

The most fascinating aspect about these problems is the hypothetical existence of divergent sequences. Forget the confusing terminology of orbit and trajectory etc.

19 September, 2019 at 1:44 pm

Alberto IbañezI have read Crandall’s 1978 paper and like the recent paper of Professor Tao, I can follow the plotline, but I cannot follow the demonstrations, which are well above my level. How does Collatz’s conjecture relate to diophantine equations if the conjecture is true?That’s why I try to take the guess to places I can understand, simple places. On equivalent problems of the form qx + r, sometimes we forget the importance of the function n / 2 for the peers. In the previous post of the professor, I leave a comment that talked about how I see the conjecture. When applying n / 2 we divide N into an infinite collection of disjoint infinite subsets/subgraphs, whose root is an odd number, of the form n and its 2 multiples. When you apply the function of the qx + r form, you are choosing how or where you want these subsets/subgraphs to join. Depending on the form you choose, you will get different results. For almost everything N, when you use the 3n + 1 function, you can avoid creating periodic loops, and that the resulting graph is a single graph weakly connected and oriented to 1. But I cannot visualize how an orbit could escape to infinity, since that every odd number connects to the graph. Analyzing this graph, it seems that several things can be deduced as if all N is connected, it is as if there is a single congruence class, and if it is possible to create the characteristic matrix, the vectors that form it are lineal dependent, that is, Its determinant is 0. Since it is an infinite matrix, it seems that it would be necessary to know if it is possible to explore the functional determinant of this infinite matrix via the zeta function of the operator.

Speaking of the property of the resulting graph, the property of the graph is weakly connected, it seems to have some connection with the property of being simply connected in the Poincare conjecture. In his paper, the professor speaks of triangles, although I do not understand the meaning. I have tried to see the conjecture in the unit circle, where a rectangular triangle is formed whose hypotenuse measures 3n + 1, the cosine is 3n and the versine is 1. For true, the value of all the hypotenuse 3n + 1 is of form 4 + 6x, (in the conjecture 5n + 1 would be 6 + 10x) where x is the ordinal of n odd. If the conjecture enters periodic orbit the value of this hypotenuse would reach from an initial n value, the value n * 2 ^ x, or the versine would have to be a multiple of n.when the value of the hypotenuse is a power of 2, then From a cosine triangle 3n, several triangles will have been formed that finally reduce to the triangle h = 4, cosine = 3 and versine = 1 and to point 1. In my words there is not much mathematical rigor, only intuition, that there is some detail that escapes us, to be able to demonstrate that cannot fall into a periodic orbit.

19 September, 2019 at 2:10 pm

JeffAlberto,

I spent years reading and re-reading Crandall’s paper. It is hard to follow, and it was his first publication. Not even in his field. Think he earned a degree in physics. But the answers you seek are in it.

As far as this ms is concerned. There isn’t anything rigorous about it when applied to 3x+1. Most of Crandall’s results are rigorous. It’s up to the reader to decide which ones, the journals are not perfect. Blogs like this one certainly have the potential to help.

Yes it is hard to imagine what a divergent sequence looks like. Take another look at the formulas in Crandall’s paper.

20 September, 2019 at 7:10 pm

Robert FrostI rather feel the number of congruence classes which reduce is infinite in number, so you could continue for a long time and still not classify them all. Then the requirement would be to find the symmetry by which these classes are generated and show then that there is an induction which accounts for them all. The character of this induction however is complex, going up to N^N, each step being of one dimension greater than the previous. Such an approach leads into the theory of Borel sets, measure theory, sigma algebra… which is as far as I have got in that direction.

The best result I saw of your form took this so far as to show that proving any one class congruent to 1 mod 2^n converges, is equivalent to the conjecture. If that result can be metrized and used to show convergence to in the 2 adic space is sufficient, this proves the conjecture, and IMO that is the closest I ever saw anybody get.

11 September, 2019 at 5:34 pm

Almost all Collatz orbits attain almost bounded values – INDIA NEWS[…] Article URL: https://terrytao.wordpress.com/2019/09/10/almost-all-collatz-orbits-attain-almost-bounded-values/ […]

11 September, 2019 at 8:12 pm

Anonymous1） almost all {N} (in the sense of natural density)

2） almost all {N} (in the sense of logarithmic density).

1) is not equivalent to 2） ？

12 September, 2019 at 3:59 am

Terence TaoIf a property holds for almost all in the sense of natural density, then it also holds for almost all in the sense of logarithmic density (this is a good exercise in summation by parts). However, the converse is not always true. For instance, the property of not having a number of digits that is a perfect square (that is, not lying in any interval of the form ) holds for almost all in the sense of logarithmic density, but not in the sense of natural density.

13 September, 2019 at 1:03 am

Alberto IbañezFirst of all, congratulations on this new breakthrough. It has made me very happy that you dedicate your time and effort to this conjecture that so many amateurs dream of making some small advance that helps their resolution, although it is evident that the mathematics necessary to solve it are only within the reach of high-level mathematics.

About “…the possibility of some very rare exceptional {n} for which the orbit goes to infinity, or gets trapped in a periodic loop”, from your previous post. How it is now with this new result?, I mean if the possibility is still less yet, or remains the same, but reinforced from a stronger point of view, in the sense of logarithmic density.

About “…the property of not having a number of digits that is a perfect square (that is, not lying in any interval of the form [10^{n^2-1}, 10^{n^2}-1]) holds for almost all N in the sense of logarithmic density, but not in the sense of natural density.”. I wish I could understand, is there a simple way to explain this?. Thank you. (Written with the help of Google translate and Grammarly)

13 September, 2019 at 7:11 am

Terence TaoOne can use the arguments in the paper to show that the set of points that are in a periodic loop have zero density (in fact the set of exceptions up to is of size for some ; I will sketch the argument in the next revision of the ms. However, the arguments do not say anything directly about the proportion of points whose orbit will

eventuallybe trapped in a periodic loop, or will eventually go to infinity; the analysis in the paper can control most initial values to the point where they can be carried very close to , but after that they are free to either get sent to , get trapped in some other periodic loop, or go to infinity, and I don’t see any rigorous tools to determine which of these is the most probable outcome.The verification of the claims about natural density and logarithmic density are a good exercise in computing sufficiently good upper and lower bounds on various averages. The continuous version of the exercise might be a good warm up for you. Namely: let be the set of positive reals that lie outside the intervals . See if you can show that (a) the limit does not exist, and (b) the limit does exist and is equal to 1. For (a) one needs to get a lower bound for the average for some values of and an upper bound for other values of that are incompatible with the scenario where the limit exists. For (b) one needs upper and lower bounds for the average for all large that converge to each other as . Using the asymptotic notation will make the calculations easier, and drawing pictures of the set (and perhaps of the areas under the curve one needs to integrate) may guide your intuition.

20 September, 2019 at 7:23 pm

robfrotI often wondered whether there is a contradiction to be had from density arguments, of the form that any counterexample must also have nonzero density. Every counterexample is after all, essentially isomorphic to the known graph, and having a periodic orbit or infinitely ascending sequence rather than a fixed point, is in a sense larger. The suggestion would be to hypothesize another orbit having some least integer n and show that its density in the integers is greater than nonzero.

12 September, 2019 at 5:21 am

Terry Tao: can an approach used to prove almost all cases be extended to prove all cases? – Julia Wolffe's Notes[…] Terry Tao posted to the arXiv his paper Almost all Collatz orbits attain almost bounded values, which caused quite the stir on social media. For instance, this Reddit post about it is only a day […]

12 September, 2019 at 4:23 pm

CraigDoes the result also hold for the 3n-1 conjecture? (Where the plus is replaced with a minus) This conjecture is known to be false.

13 September, 2019 at 12:57 am

AnonymousCraig, what do you mean about 3n-1 being known to be false? Is it known to diverge for some n? I just tested it up to 1e8 and found the informal paper http://vixra.org/abs/1610.0106 which claims to have tested it to 1e9. Are there some more publications? It’s surprising that there is not much info about this sequence. It doesn’t seem to have been studied much, but its behaviour superficially resembles 3n+1’s. Wikipedia also says nothing about it.

13 September, 2019 at 4:51 am

CraigThe 3n-1 conjecture does not hold for n=5 an n=17. You get a cycle. It probably never diverges, just like the 3n+1 conjecture.

13 September, 2019 at 6:39 am

CraigThe probable reason why the 3n-1 conjecture is not found so much in the literature is because it is false. But it is very important, since it demonstrates that any proof of the 3n+1 conjecture use the fact that the 3n+1 function has a plus sign and not a minus sign.

13 September, 2019 at 10:29 am

AnonymousOk, thanks. I took the 3n-1 conjecture to mean that 1, 5, and 17 were the only cycles, per the vixra paper. A similar thing happens with the 3n+1 conjecture if you allow negative n. There are several known cycles but’s an open question whether there are more.

13 September, 2019 at 11:43 am

CraigThere is nothing stopping a 3n+1 sequence or a 3n-1 sequence from diverging to infinity. That can happen if most of the iterates in such a sequence use the function (3n+1)/2 or (3n-1)/2 instead of n/2. Even though the probability of this happening is nil, it is still possible. Because of this, I can’t see how anyone will ever prove that either sequence cannot diverge to infinity. The best one can do is do what Prof Tao did in his new paper.

13 September, 2019 at 4:43 pm

AnonymousI’m saying 3n-1 has 3 known cycles, so the 3n-1 conjecture (i.e. statement whose truth value is unknown) would be that all n end up in one of those 3 cycles. The conjecture is false if some number escapes to infinity, or if some number lands in a cycle other than the known 3. Anyway it sounds like that question is still open.

13 September, 2019 at 7:05 am

Terence TaoOne would have to check the details carefully, but on a quick glance it would appear that the main results of my paper would also cover the iteration, after inserting some minus signs in various places (most notably in the definition of the offset map). Heuristically one would expect all orbits of this iteration to be bounded (and thus eventually periodic), although the precise set of possible limiting cycles is different.

EDIT: One slightly tricky thing is that in the 3x-1 case the analogue offset map would only be expected to stabilise if one fixes the parity of due to a new factor of in the map. So one may have to only work with even iterates of the analogue of the Syracuse map, rather than all iterates, in order to get around this problem. But this should only require some minor notational complications in the argument rather than necessitate any serious new difficulties.

SECOND EDIT: On further thought, the offset map for the map doesn’t actually contain a factor, so the arguments should in fact go through without difficulty (indeed, one can think of the iteration as nothing more than the usual iteration applied to negative integers). The previous comments would apply however for a iteration for instance.

14 September, 2019 at 12:58 pm

Alberto IbañezI do not know if I bring some light, but I think that 3n + 1 is symmetric with respect to zero, that is, using negative numbers, to 3n-1, and 3n-1 with positive numbers behaves the same, it is symmetric with respect to 0, to the 3n +1 with negative numbers.

17 September, 2019 at 11:40 pm

Gottfried HelmsThis idea of “symmetry” does not really hold. A (somehow) popular equation which must be satisfiable for cycles states with odd steps and as sum of even steps. Now if you insert positive numbers for the then the rhs is between and and if you insert negative numbers then the existence of a perfect power of 2 between and is another question. Of course we have always latex possible solutions for S between but it might be, that the value lies such that either there is no perfect power of 2 between and instead all perfect powers lay between or conversely. So solutions for cycles are *not* symmetric around zero.

17 September, 2019 at 11:58 am

JeffSo since an infinite subset of the natural numbers map to 5 under 3x-1, almost all leaves that many numbers unaccounted for. Especially when this method sets the target bound of 1!

Basically, 3x-1 gives a concrete example that this ms represents no progress whatsoever on 3x+1. Just like all of the references it cites.

13 September, 2019 at 10:33 am

Жандос МәмбетәліCollatz conjecture in reverse:

Suppose we have such a Collatz fraction:

which is equal to a natural number. Then, for each power of two we have many other degrees of the form , ; any of which can replace the power of two and get another integer (natural) fractional solution.

– Are different natural numbers.

Example:

for: .

Depending on the , we equate the result of calculating such a fraction to , then the relations of finite differences will be:

where this is a subscript exponent associated with , (the index of the power of two of the variable part of the fraction).

13 September, 2019 at 11:20 am

Terry Tao prouve presque la conjecture de Collatz - Technologik.fr[…] Presque toutes les orbites de Collatz atteignent des valeurs presque limitées (article de blog) […]

13 September, 2019 at 2:32 pm

AnonymousIs it possible to extend the method for some collatz-like sequences in ?

14 September, 2019 at 10:15 am

RSHas there been any work on quantifying “almost all”? For instance, is it known that there are c, d < 1 such that for large enough N, all but of integers between 1 and N have minimal element of the Collatz orbit at most ?

14 September, 2019 at 5:45 pm

Terence TaoThis particular claim essentially follows from the first part of Proposition 1.11 of my paper (which also applies if the logarithmic distribution is replaced by the uniform distribution). It may have implicitly also appeared in the previous papers of Allouche and Korec mentioned in the paper, though I don’t have those references handy at present.

29 September, 2019 at 12:47 pm

JeffThree up votes to one down vote.

3x-1…

Let’s keep the pun and the fun.

14 September, 2019 at 12:37 pm

AnonymousIs there any probabilistic conjecture on the distribution of the lengths of orbits starting with a given distribution of the initial element of the collatz sequence ?

14 September, 2019 at 5:40 pm

Terence TaoYes; see for instance this paper of Kontorovich and Lagarias.

14 September, 2019 at 1:53 pm

AnonymousSince it is not known if the Collatz conjecure is decidable, the current situation is similar to that of the RH (if it is undecidable then it must be true!)

14 September, 2019 at 2:16 pm

not necessarilyNo, because boundedness of individual orbits (unlike RH counterexamples) cannot necessarily be determined by finite calculation. Collatz conjecture, whether that means “all orbits include 1” or “all orbits eventually go below 3 zillion”, could be undecidable because one particular orbit is unbounded, but there is no proof of that in the axiom system chosen as a foundation. If there were a proof that a particular finite algorithm can test any given N for having an unbounded orbit or not, then the problem becomes RH-like in that undecidable implies true (i.e., every N passes the test, so there are no counterexamples, but there is no uniform proof that all N have this property).

15 September, 2019 at 6:19 am

itaibnIf I’m not mistaken, the proof of the prime number theorem can be thought of as first establishing that the prime numbers are on average distributed that way in the sense of logarithmic density, and then showing that the prime numbers are not correlated to any and usually Fourier analysis to establish the distribution of the prime numbers in ordinary density. Is it possible that a similar approach here will establish a result like this one but in the sense of ordinary density instead of logarithmic density? Specifically, we can seek out complex measures of the form , where is continuous in the 3-adic topology, which are eigenfunctions of the dynamics. I believe these measures can be characterized similarly to the Syracuse measure in (1), but with an extra weight , modulo sign and similar errors. If all the eigenvalues for have norm less than one then we will expect that starting from a uniform distribution these components will become negligible and only the Syracuse distribution will remain.

15 September, 2019 at 6:34 am

Terence TaoYes, I believe that some argument along these lines (considering the joint behaviour of the Syracuse iteration in both the “3-adic” and “Archimedean” aspects, by working with a joint character instead of just a 3-adic character in Proposition 1.17 (or equation (7.2)) of my paper, and in particular trying to estimate expressions such as ) should eventually be able to upgrade the “logarithmic density” aspect of my theorem to “natural density”, although the calculations in Section 5 will have to be replaced by a more careful computation that keeps much better track of the Archimedean behaviour of the Syracuse iteration and its potential coupling with the 3-adic behaviour. (It may potentially be that the notation and arguments become cleaner if one works on the adeles instead on various components of the adeles such as , , or (as is done in my paper) , in the spirit of Tate’s thesis, particularly if one wants to generalise to other Collatz type iterations as discussed in other comments here. I also have the vague sense that the nonabelian Fourier analysis of the affine (semi-)group on the adeles might also be naturally involved in all this analysis.) If one is lucky one may be able to leverage the existing purely 3-adic theory in my paper as a “black box” to handle the case and use some other, simpler, argument to handle the case, again somewhat in analogy with the prime number theorem. (The analysis in this paper of Lagarias and Soundararajan on Benford’s law in the Collatz iteration may also be of relevance here. Related to this, I suspect that to get a sufficient amount of Archimedean equidistribution one would need something like Baker’s theorem on the Diophantine nature of .)

I don’t have any plans to work on this particular refinement of the results (and all my current graduate students and postdocs are busy with their own projects and/or are working in rather different areas of mathematics than the ones that are relevant here), so you (or anyone else) are certainly welcome to pursue it if you wish.

29 December, 2019 at 5:16 pm

michaelmrossThe distribution of odd sequence steps is given by a simple function:

Another way to express this is to say: Given three arithmetic operations, for every odd number n only a or b or c can be a whole odd number.

a = ((n + 1) * (3 / 2)) – 1

b = ((n – 1) * (3 / 4)) + 1

c = (n – 1) * (1 / 4)

Then you can see that the ratio must be 2:1:1 of the three possible operations.

You can triangulate the result of the congruence-based additive function or the a,b,c algorithm and the conventionally expressed Collatz function using factors of 2 and 3, referencing the a, b, c operations:

a: Input factor of 2 is replaced with an output factor of 3

b: Input factors of 2*2 are replaced with an output factor of 3

c: Input factors of 2*2 are eliminated

– Remember that the factoring is being applied to n+1 or n-1 (where n is odd).

– Operation c can correspond with powers of 2, by consecutive repetition.

15 September, 2019 at 7:45 am

mayor of SimpletonIn Remark 1.4 of the paper, at the end of the paragraph, is the equivalence literally with sets of log density approaching 1 (i.e., there always exists a regular enough subset whose log density exists) or the a priori weaker statement that the lim inf (of the sequence computing) log density goes to 1 as the Collatz orbit-minimum parameter is raised?

In either case there is a formulation of the main result without slow-growing functions, as “[lim sup] log-density of exceptions (Collatz orbit stays above C) goes to 0 as C increases” but it wasn’t immediately obvious which sense of lim-sup applies.

15 September, 2019 at 8:07 am

Terence TaoOh, good point. I had assumed without thinking about it too hard that every set of lim-inf log density at least had a subset whose log-density existed and was equal to , which is why I formulated the remark as stated, but now that I look at it more carefully this is not the case, and one should indeed use the lim-inf formulation instead to get the actual formal equivalence (although it may be possible in this specific case to still recover the stronger claim currently stated in Remark 1.4 even if it is not logically equivalent to the main theorem). This will be corrected in the next revision of the ms.

15 September, 2019 at 11:30 am

Terrence Tao’s Progress on the Collatz Conjecture | An Unstructured Mess[…] Paper: https://arxiv.org/abs/1909.03562 Tao’s blog post about the paper: https://terrytao.wordpress.com/2019/09/10/almost-all-collatz-orbits-attain-almost-bounded-values/ Wikipedia page for Collatz conjecture: https://en.wikipedia.org/wiki/Collatz_conjecture A slightly […]

17 September, 2019 at 3:54 am

Sandor PozsikDear Mr. Tao,

There could be a way to prove conjecture:

1) An impair number will always be followed by a pair.

2) A pair number will either be followed by an impair and then see point 1, either by a pair number.

3) No number is repeated within one series.

4) If the number is a power of 2, the series will converge to 1.

5) from Points 1,2 and 3 we see that unrepeated pair numbers will be generated infinitely, except if the series reaches a number which is a power of 2 (point 4).

6) The probability of generating a power of 2, when generating infinite number of pair numbers is 100%, so it is 100% sure that the serie will reach a power of 2 and then converge to 1.

Best Regards,

Sandor

18 September, 2019 at 12:53 am

AnonymousDear Pro.Tao

Maths problems always everyone nerve in the world.So, today I want to tell a fun story in order to reduce stress.”Last night, I intruded into Pro.Tao’s house to steal money from a big box.Unfortunely , after I broke the box , I found no money in the box. Materials in the box such as Hodge conjecture, P vs Np , Goldbach conjecture,Navier Stokes , Riemann…..solved by Pro.Tao.”

A forever fan of Pro.Tao

Best wishes

19 September, 2019 at 3:23 am

Ridiculous ProfessionalGowers has a viXra overlay journal with double the publication rate as Pi. So maybe if things don’t go well with the next revision you could consider submitting there.

19 September, 2019 at 9:32 am

notyetreadyDo you think there might be some relationship between the 3x+1 problem and the abc conjecture ? Saying it differently, one may wonder whether both conjectures coud be a logical outcome of a single and more general statement (possibly undecidable) concerning the additive properties of numbers composed of large powers (of 2 and 3 in the case of 3x+1).

19 September, 2019 at 6:55 pm

Terence TaoThere is indeed a relation between the 3x+1 problem and results such as Baker’s theorem which establish some separation between powers of 2 and powers of 3, and which provide key examples of where the abc conjecture is known to hold; for instance results such as Baker’s theorem have been used to rule out certain types of Collatz cycles, and to establish Benford type laws for Collatz iterations. See my previous blog post on the Collatz conjecture for further discussion.

20 September, 2019 at 2:44 am

AnonymousIs the complexity of the Collatz iteration dependent on the irrationality measure of ?

20 September, 2019 at 9:37 pm

TomThere are relationships between Pillali’s and ABC conjecture. It is quite important for Collatz’s hypothesis to know how many solutions exist for 2^(x + y)-3^y=k, for some fixed k. Similar questions are raised by the Pillali’s hypothesis which is related to ABC conjecture. We have solved so far only the case for k=1 (Catalan Conjecture). We do not know if there is a finite amount of other solutions. For example, if there were an infinite amount solutions for k=5, then there is a higher probability that then some 2^(x+y)-3^y=5 divides equation (5):

https://terrytao.wordpress.com/2011/08/25/the-collatz-conjecture-littlewood-offord-theory-and-powers-of-2-and-3/

The solution of the ABC hypothesis and Pillali’s conjecture can supports the Collatz hypothesis. But the fact that Collatz problem contains such problems may indicate that it is much more difficult than these problems.

21 September, 2019 at 4:25 am

Alberto IbañezI am not sure of the relationship that may exist between Pillali, ABC and Collatz. I knew the relationship between Collatz and diophantine equations, although I have not fully understood it, recently, thanks to Jeff’s advice, I am trying to understand this relationship through the paper On the “3n + 1” Problem

By R. E. Crandall (1978). Somehow then Pillali and ABC should be related to the diophantine equations. But apart from this, for Collatz, solutions of the form .with fixed k, should not be of the form , for almost all N, where k takes values from the form (8) of the previous post of the professor about Collatz, where k can only be 1 when y = 1. Although we are assuming the conjecture true, we can study the cases. The value of k somehow sets the value of 3 ^ y. For y = 1, there are infinite powers of form 2 ^ 2n, which give us infinite values of n that meet this condition: 1,5,21,85, … (4n + 1). different values of k, for n odd, must be odd and not multiples of 3. Somehow the different orbits of Collatz, for odd n, are comparable to the factorization in prime numbers, that is, for each value of k there is a unique value 3 ^ y and a unique value of 2 ^ x, for a unique n, which satisfies equality (for n even it is almost equal with some nuance). I don’t know if through this equality, setting values of k, 3 ^ y can be set and consequently set 2 ^ x, for a unique value of n. But we can also propose equality so that an orbit enters a periodic cycle, which would be of the form . For this equality we have a certain advantage, knowing that if it is more than probable that the conjecture is true, the only possible solution to this equation must be when n = 1 and k = 1. I am far from knowing how to handle this equality, although one way of seeing it is that and . I’ve always thought that the g.c.d and the Bezout identity have something to say here, but I don’t know attack this relationship.

And we can even pose the orbits that escape to infinity for a fixed k, where , then we have , would be infinite, and we would need some number that by subtracting infinity is k, or ,with infinite n in this way. Although the consistency of this approach is not very well. I don’t know if transcendence is here, because of the connection of transcendence and Collatz I still don’t understand and I have to improve it.

As for connections with other conjectures, based on my intuition and almost always devoid of any rigor, I see some connection with Poincare and rectangular triangles in 2-d reducible to 1 point, as I indicated in a previous comment. And even, very speculatively, I like to see the conjecture related to inflationary theory and big-bang, in the sense of how from a point a connected infinity can be created, or how this could be reduced by a single point. Thanks.Sorry for latex, I don’t do very well lately.

19 September, 2019 at 9:44 am

Robert FrostWould there seem to be any hope of sharpening your results by restricting to only the 5-rough numbers? Eliminating the leaves of the graph by considering which commutes with multiplication by both 2 and 3 gives an even superior form of the problem IMO than the Syracuse function, it being surjective.

19 September, 2019 at 10:16 am

Robert Frost jr.“And tall and in a port of air”

Almost anything is doable if we drop the chains of rigor.

19 September, 2019 at 1:52 pm

Robert Frostrigour follows insight

19 September, 2019 at 7:03 pm

Terence TaoA single iteration of the Syracuse map already places one in the setting of 5-rough numbers (numbers not divisible by either 2 or 3), so the effect of restricting to this setting on the analysis of the paper (which is studying a significantly larger number of iterates) is fairly minimal.

Once one restricts to 5-rough numbers, the Syracuse function is not only surjective, but it has an approximately invariant measure , which one can view as the main source of the results of this paper. This measure can be defined as

where is a natural number comparable to a small multiple of (the stabilisation result in Proposition 1.14 my paper ensures that the exact choice of is not terribly important). This is an infinite measure supported on the 5-rough numbers, and Proposition 1.14 combined with Lemma 1.12 basically tell one that is approximately invariant: for any set of 5-rough numbers. This measure implicitly makes an appearance at the end of Section 5 of the paper.

19 September, 2019 at 11:59 pm

Robert FrostThank-you, this really helps add some insight for me as I had found myself getting sucked towards Baire/Borel sets, invariant measures and sigma-algebras in studying this problem so it’s pleasing to find connections to this ball-park already made.

19 September, 2019 at 10:00 am

Robert FrostOn a related note… can you send 2Z-1 to a subset of an interval of the real line in such a way that some superfunction of the Collatz function on the same segment has orbits only the same periodicity as the function in Z? Via Sharkovskii’s theorem this would prove the nonexistence of trivial loops by contradicting known results that orbits of period 2 do not exist.

19 September, 2019 at 7:41 pm

Terence TaoGiven how oscillatory Collatz maps and their iterates are, I am sure that any reasonable continuous extension of these maps to the real line will inevitably create any number of new fixed points from the intermediate value theorem. The dynamics of the Collatz map involve not only the Archimedean completion of the rationals, but also the 2-adic and 3-adic completions, so it is unlikely that a purely real-based approach is going to capture enough of the complexity of the Collatz dynamics to resolve the problem.

19 September, 2019 at 11:45 pm

Robert FrostIt’s fitting that you mentioned both 2-adic and 3-adic because I had already restrained myself from the following comment… I have hope that a completion of the 5-rough positive integers using a composite of the 2 and 3 adic metrics might yet lead to an algebraic solution dropping out. after all. Then quotient out the powers of 2 and 3 from the multiplicative monoid. The conjecture effectively states that may only be approached through so it seems natural to send to zero as to infinity. On an algebraic note, it’s perhaps worth pointing out that the orders of cycles over the 5-rough integers (both positive and negative) give the dihedral group D7. On another note, more related to your previous post and the connection to transcendental numbers there is a “lowest” (in reverse) 5-rough trajectory which is not 1,1,1… namely 1,5,13,17,11,7,37,49,… which is almost certainly of some use. Its parity sequence I imagine is not in Z_2 since it obviously never terminates although I would be curious whether some root of unity or other such object might be appended to Z_2 in order to contain it.

20 September, 2019 at 3:22 am

Robert Frost jr.What do you mean when you say

“… which is almost certainly of use…”

Thanks.

20 September, 2019 at 7:07 am

Robert Frost@Robert Frost Jr. I’ll overlook your name and assume for now you’re not being disingenuous. I mean this: Let be the isometry on given by recording a for every odd number and a zero for every even, in a Collatz sequence orbited by the version of the graph. Then there is a “lowest trajectory in ” given by having . Extending to infinite trajectories (heading backwards) requires something at least as big as in which case there are at least two further “lowest” trajectories in : The trajectory is the “general” lowest possible trajectory (i.e. if we do not assume every sequence converges to . But if all sequences *do* converge to $1$ then this bound sharpens to where is the sequence . Then my claim is that the precise nature of this number is almost certainly a useful connection between the Collatz graph and transcendental number theory. There’s also a connection between this number and a (not well-founded) set of ordinals which is invariant under truncation/subset but I haven’t got that quite straight in my mind yet.

20 September, 2019 at 9:17 am

Robert Frost jr.Can you define the form of the subset of odd numbers which, by your mapping, are identified with sequences of the form 1,1,1,…

of arbitrary finite length?

22 September, 2019 at 8:49 am

Robert FrostIf is the isometry on defined above and you ask for which sequence gives , only a constant sequence of 2-adic numbers has this form – it is in fact and since is an isometry it’s the only element in with this property.

20 September, 2019 at 2:04 am

Alberto IbañezEstimated Professor: About”how oscillatory Collatz maps and their iterates are”.The classical interpretation of the conjecture creates these chaotic behaviors, but is it possible to interpret the conjecture by avoiding these behaviors? Moreover, are they useful for solving the conjecture for all N? For example, following the conjecture via the Bohm and Sontacchi, maintaining the numerator without dividing by the powers of 2 and adding the numbers of the form (8) of the previous post. This segment grows continuously until finding a power of 2, and if does not fall from n in a , does it seem to have infinite probabilities of finding a power of 2 versus? probabilities of not finding it and escaping to infinity, which would imply an infinite number of counterexamples to the conjecture.

Another example could be to study the equation of the form if n enters a periodic orbit, with of the form (8), where , where the result is, securely, only possible with n = 1.

Or even restrict the conjecture to the unit circle, forming a right triangle where the hypotenuse would be the 3n + 1 values, the cosine the 3 ^ k * n values and the difference between the two values. While I don’t know how to attack this option, it seems possible, at least, to study it.

Or even the representation of the function in the Cartesian axes is simple, although it cannot tell us anything. Thank you.

20 September, 2019 at 5:49 am

JeffI agree. And to add, any affirmation of 3x+1 implies no solutions to (7.3) per the constraints given in Crandall’s 1978 paper.

And affirmation of a finite solution set to (7.3) is exactly the finite cycles Conjecture.

It is massively difficult, and if you watch the literature you will see number theorists are progressively developing techniques to settle such questions.

Now stick in hypothetical divergent sequences…

Trying to skate around real progress is futile. And any perceived insights are delusions.

22 September, 2019 at 2:28 am

Alberto IbañezDear Jeff. I am still studying Crandall’s 1978 paper. I do not quite understand it and I do not quite understand you, but I seem to intuit something. The hypothetical existence of orbits that seem to escape to infinity is deduced from the existence of orbits of infinite steps. These orbits would produce infinite counterexamples to the conjecture, and it seems strange not to have found at least one. Then there are the orbits that are trapped in a periodic cycle, which involve a finite number of counterexamples. These orbits, in the sense that Collatz’s algorithm only stops when it reaches 1, has infinite steps, then they are infinite periodic. Is it possible that these two types of orbits are really the same? It has been misunderstood that there are orbits that have infinite steps, periodical orbits, with the fact that they escape to infinity?.

Regarding the diophantine equation of the form

, it seems that their solutions give us the possible periodic orbits for some n and some y. But it seems that it is somehow decontextualized, and it should be of the form

, although I don’t know if it’s really better that way. If the only solution is the known for n = 1, y = 1, k = 1, x = 2, then the conjecture is true. In my previous comment I tried to analyze how to attack this equality, both for orbits that enter periodic orbit, and for those that escape to infinity, but if they are the same, it would be enough to demonstrate only one of the options.

If for almost all n it is true that

, and for a periodic orbit, it is necessary that

, comparatively it seems that the distance separating the powers of 2 and 3, for almost every n, is less than that necessary to reach a periodic orbit. Some interesting questions in these equalities are that both

and must be of the form

(8). The value of k is fixed for the value of (8).

For there to be a number that belongs to a periodic cycle we would have to study

and so that n escape to infinity we would have

where

, where the only possible solution seems to be 0 or 1.

22 September, 2019 at 7:24 am

JeffAlberto,

Ibanez make great electric guitars. Any relation?

You have a lot of ideas. One really great one is characterization of a lower bound for differences of powers of 3 and nearest powers of 2.

My gosh, we cannot even prove the bound is exponential!

As for this paper, you’ll notice earlier questions about ‘closing the gap’ between all and almost all.

Well, that would entail completely removing all probabilistic arguments from it. How much of the paper would be left?

22 September, 2019 at 8:06 am

Terence TaoBaker’s theorem provides an exponential lower bound for the difference between powers of 3 and powers of 2. See Corollary 4 of https://terrytao.wordpress.com/2011/08/21/hilberts-seventh-problem-and-powers-of-2-and-3/ Unsurprisingly, these sorts of results end up being used in some of the Collatz literature, for instance in ruling out certain types of cycles.

As I mentioned in an earlier comment, there is only a very slim chance for directly transferring an “almost all” result in this setting to an “all” result, but the chance is not entirely non-zero, particularly if one can somehow combine the “almost all” result with some complementary non-trivial results on the Collatz problem. Here is one unlikely but theoretically possible scenario: an almost all result is proven that shows that all but at most starting points in end up at a value bounded by a constant . This by itself does not settle the problem: but suppose one also shows that any counterexample to Collatz has a pre-image tree that grows faster than for some (for instance the Krasikov-Lagarias result mentioned in the paper is of this type with ). Combining the two claims, we conclude that all counterexamples to Collatz must attain a value less than , otherwise the second claim would contradict the first. If this value of was small enough, one could then hope to resolve the full conjecture by a numerical calculation verifying the Collatz conjecture up to . (Note that this last step would also allow one to distinguish the problem from the problem, for which the first two steps might still work, with only the numerical verification step differing between the two iterations.)

Personally I view the above scenario as being remote (among other things, as I discussed in my previous post, pulling this off must require at some point either using or proving some version of Baker’s theorem.) However, as I also pointed out in another comment, even in the absence of direct transferability, getting a better understanding of the relative difficulty of various “almost all” problems can give some heuristic insight into the

relativedifficulty of various “all” problems, which can lead to predictions as to the right proof strategy even before this strategy can actually be executed. For instance, Conway’s FRACTRAN iterations show that there are some Collatz-like problems for which the analogous conjecture is undecidable. This is often viewed as an obstruction to proving the Collatz conjecture. On the other hand, the result in my paper relies heavily on the existence of an invariant adelic measure for the iteration with negative drift, and it does not appear that the undecidable FRACTRAN iterations have such a measure. So this raises some interesting, and potentially tractable questions: (a) do the results in my paper work for any Collatz-like iteration with an invariant adelic measure with negative drift? and (b) are there any examples of Collatz-like iterations which have an invariant adelic measure with negative drift, but which contain unbounded orbits? If the answer to (a) turns out to be “Yes” and (b) turns out to be “We can’t find any”, then this suggests that the natural general conjecture for Collatz-type iterations should be “Every Collatz-type iteration with an invariant adelic measure with negative drift should have all orbits bounded”. This abstracts away the role of special numbers such as 2 and 3 (and also avoids having to distinguish for instance between the 3x+1 iteration and the 3x-1 iteration), explains the distinction between the 3x+1 and 5x+1 iteration (the latter having positive drift) or the FRACTRAN iteration (for which the invariant adelic measure is either non-existent or has positive drift), and may give clues as to what the right way to proceed further is (for instance, such a conjecture has a flavour of a “local to global principle”, suggesting that ideas in the penumbra of other such local-to-global principles (e.g., the Bombieri-Lang conjecture) may be relevant). Of course this is all still rather speculative, but these are typical of the way other partial results in other mathematical problems have led to further insights and progress.Finally, it is worth pointing out that while proximity to well known problems often serves as motivation for mathematical research, these problems are by no means the only objective, and one can often get unexpected other advances in mathematics even if one only obtains partial progress towards the initial motivating goal. For instance, a large fraction of algebraic number theory was developed in hopes of resolving Fermat’s last theorem; it did not succeed at this goal, and FLT was eventually established by rather different means, but the theory was still immensely valuable nonetheless. Sieve theory was invented to try to solve conjectures such as the twin prime conjecture; it has thus far been unable to achieve this (roughly speaking, it only controls “almost primes” rather than “primes”, without the addition of highly nontrivial extra input), but nonetheless has become a basic part of the analytic number theory toolkit. More recently, the work of Einseidler, Katok, and Lindenstrauss establishing a strong “almost all” version of the Littlewood conjecture is not expected to lead to a full resolution of that conjecture, but nonetheless has generated a lot of advances in our understanding of entropy methods in homogeneous dynamics. (See also this post of mine on the particularly valuable nature of partial progress in mathematics, which is nearly unique amongst all disciplines in this respect.)

22 September, 2019 at 10:13 am

Jeff@Tao,

Corollary 4 looks like observations I circulated about a decade ago. When did you add them to that post?

Anyway, I’ll be as precise as possible here regarding the adjective “exponential”.

Are you saying there exists some legitimate, fixed, positive constant beta such that 3 to the power of beta is strictly less than the right-hand side of the inequality in Corollary 4?

22 September, 2019 at 10:26 am

JeffAddendum,

Oh yeah, we must scale beta by multiplying by x in order to get the form of a legitimate exponential bound.

22 September, 2019 at 3:22 pm

Jeff@Tao,

Okay, so does your Corollary 4 give an ‘almost’ exponential lower bound?

I don’t understand.

22 September, 2019 at 5:16 pm

Buzzman@Terry,

I think the powers of 3 and powers of 2 arising from the expansion of the function for iterations lead to an undecidable expression since the inverse of , by one step of iteration, leads to one-to-many mapping from an odd to an infinite set of odd iterates. Unless I misunderstood your language, I do not get how one can establish a bound in such a case. I believe that the intricate patterns in Collatz dynamics can be simplified, without loss of information, by bypassing the even operations and examining instead the odd trajectories in reverse through the inverse of the function, as earlier noted by Lagarias. It appears to me that there has been less effort in this regard. Since there always exists an integer where any compositions of generate a parity vector consisting entirely of even as , then any resulting bound will always yield . At any rate, your partial result is already tremendous by novelty of approach.

23 September, 2019 at 3:58 am

Jeff@Terry,

Was looking at the 2003 paper of Krasikov and Lagarias in Acta Arithmetica. The remark at the top of page 254 raised a red flag with me.

Did they misunderstand what form an exponential lower bound takes?

23 September, 2019 at 4:52 pm

JeffThe link to the partial progress post is missing. It seems way off base and actually, a bit contrived, given this paper.

But this paper is not partial progress anyway.

It says on Wikipedia that the paper of Krasikov and Lagarias gives rigorous bounds. I’m thinking not.

What is especially interesting is that it is elementary. Hmm.

26 September, 2019 at 2:00 am

Alberto IbañezDear Professor: Constate C seems to be relevant in the conjecture. Surely its nature is obvious, but I do not quite understand it. Is it big? Is it small? Is there any way to explain its nature in an accessible way? I have read your previous post many times but I did not understand the relationship with Baker, although I think I begin to understand it. Observing the nature of the periodic orbits of 5n + 1 and 3n-1, I have observed that the value k, the number of iterations of the cycle or the power of 3, as you can see, coincides with the cardinality of the set n odd that are counterexamples to the conjecture for a value y (or q), the distance between a power of 2 and 3.the higher is k, the greater the number of counterexamples Is that relevant? and for orbits that escape to infinity? I still don’t see that infinite odd numbers can have an unlimited orbit, or what form they have when heuristically it is almost impossible for even a small number of counterexamples to be given? Finally, I cannot find information about “an invariant adelic measure”, is possible to talk about it? thank you very much.

27 September, 2019 at 12:26 am

JeffAlberto,

One thing to notice is that Crandall’s (7.3) exists, in a philosophical sense, without the 3x+1 map. We can write it down and ask about the existence of solutions without consideration of the iterations of the map.

But the reason there are so many papers on this problem is because the iterations gives us something to grab onto.

The probability type arguments ignore an infinite subset of the iterations, at best.

Now we have earlier comments about a proof strategy built upon this draft paper suggesting we could ‘abstract’ away special numbers such as 2 and 3.

Well, that would amount to erasing (7.3) all together. Besides, who really cares if more solutions exist to it.

22 September, 2019 at 8:58 am

Robert FrostOn the oscillatory nature of iterates of collatz maps as a barrier to the application of Sharkovskii’s theorem, it should be borne in mind that one is free to multiply any Collatz sequence by any arbitrary sequence drawn from without affecting the integrity of the sequence, with from sets at least as large but possibly larger. I imagine Bakers theorem will inform the degree to which such a process can remove the oscillatory properties of sequences but that part is beyind me.

19 September, 2019 at 5:30 pm

AnonymousDear Pro.Tao,

May I have a suggestion?

Why do not you have a new polymath to solve Collatz conjecture?

Only 10% you have a complete proof.

Or there are other many reasons:

1)Very little experts on Collatz conjecture in the world

2) Your breakthrough is very new and suddenly that makes other mathematicians can not catch up you

20 September, 2019 at 2:45 am

TheoLet’s assume we forget about the even numbers.

Let’s also assume we generate the Collatz sequence starting from 1 by using a given recursive function f(x).

We forget about the even numbers.

f(1) would give us 1 – 5 – 21 – 85 – 341 – 1365 – etc..

The results of f(1) we would give us the terms of the following functions

f(5) we would us 3 – 13 -53 -213 – 853 – etc..

The results of f(5) we would give us the terms of the following functions

f(13) we would us 17 – 69 – 277 -1109 – 4437 – etc..

f(53) we would us 35 – 141 – 565 -2261 – 9045 – etc..

If all functions were based on the results of the previous functions like f(13) which is based on f(5) which is based on f(1) would we be able to say that if any odd numbers belong to that function then it must come from f(1) through a finite number of iterations?

20 September, 2019 at 11:53 pm

AnonymousThe simple Collatz iteration with its complicated orbits may be viewed as a kind of “chaotic” dynamics (“locally unstable” yet “globally almost bounded”) on the integers. This seems closely related to chaotic dynamics, so it may be interesting to find a “natural” definition for its analogous Mandelbrot set.

The Mandelbrot set is defined as the set of complex numbers for which the function does not diverge when iterated from , so it seems that a natural analogous discrete “Collatz-Mandelbrot set” for may be defined as the set of for which the function does not diverge when iterated from . Where is a “Collatz-like” function defined over the integers by for odd integers and for even integers .

21 September, 2019 at 3:21 am

AnonymousSince , it is more interesting to start with (or any other odd integer.)

21 September, 2019 at 3:16 am

Alexelder brother,nice to meet you!

22 September, 2019 at 1:24 am

BuzzmanThe way I see it, establishing asymptotic bounds of the form for satisfying always leads to since there always exist that monotonically increase for any compositions of . If one takes every even integer input as convergent since , then it suffices to prove the Collatz conjecture only for odd . However, any odd of the form for , where obviously is Mersenne if $k=1$, can be made monotonically increasing for increasing . Hence, one expects that the exceptions to any derived asymptotic bounds are odd of such forms, as initial inputs or as iterates in the trajectory of any odd or both. Alternatively, one can invert the function to map odd to odd . The resulting iteration of the inverse function constructs an arborescence graph , with vertex and edge sets and , respectively. Then one can alternatively prove the Collatz conjecture by showing that every vertex in is unique and that exactly covers the set of odd natural numbers.

22 September, 2019 at 10:15 am

BuzzmanWhere it appears above, it should read: (for even input ).

22 September, 2019 at 8:22 pm

AnonymousDear Dr.Tao,

When I was childhood, I always admire the best heroes in the science such as Newton, Einstein , Euler. Now , I also admire them. But , after reseaching the best heroes in the world nearly 30 years, I have found that you have many special things which above heroes never have. I can not express here , because after writting out here, many people against me. It’s the best way that a long time will prove all. Many people in the world will understand , maybe more 50 years later, it’s that time maybe you die.That is a problem.

And today I want to discuss other probem.I am not surprised after you claim of proving Collatz conjecture in September 2019.I acknowledge very well that you solved Collatz 2-3 years ago not 2019. And I also know that you have solved many big conjectures , but you do not till post them.Why? You are humble , humanity, not selfish. You want share profits to other mathematicians. I wonder if you do not reveal Collatz this year, other mathematicians succeed in proving Collatz, that’s time many big prizes belong to them not you. That is a thing I only admire and like you , not other mathematicians. Like a race, your speed is the fastest, but you control to limit your speed to yield other men. You accept you are behind them.

And now who else find my idea right, please up vote

Thanks all you very much.

22 September, 2019 at 10:27 am

BuzzmanSorry, please ignore the suggested correction. The initial statement stands as is. Obviously, I’m a stupid who can’t understand my nonsense.

22 September, 2019 at 8:25 pm

TomI am an independent researcher, an amateur (but I’ve been dealing with this problem for 10 years). I created a symmetric-key cryptographic system based on Collatz functions and Collatz-like functions. I’d like to meet someone who could review my algorithm, possibly publish it with me (because my own description will probably have many formal shortcomings). Where to find specialists for this problem who know something about cryptography at the same time?

23 September, 2019 at 9:03 am

JeffHere’s a recent proof attempt

http://www.sciencepublishinggroup.com/journal/paperinfo?journalid=141&doi=10.11648/j.pamj.20180705.12

23 September, 2019 at 10:42 am

Anonymouslol

23 September, 2019 at 1:56 pm

Anonymousthat’s a scam pay per publishing journal so anything published there can be safely disregarded

23 September, 2019 at 3:54 pm

JeffThe finite cycles Conjecture will someday yield. And I think amateurs will have just as much credit as the professionals at that time.

Ramanujan was largely self taught. Now we have the internet. So it won’t be too much longer before the next Ramanujan surfaces and comes to our rescue.

27 September, 2019 at 2:04 pm

Alberto Ibañez@jeff keeping infinite periodic orbits aside, orbits that escape to infinity, unbounded or infinite orbits are the same, right? So was Crandall the first to postulate the existence of these orbits? Are there other researchers who postulated the existence of these unlimited orbits?

27 September, 2019 at 3:06 pm

JeffYes, unbounded sequences are not cycles. Collatz himself seems to be the first one to think of them with this map. But the concept of unbounded sequences probably goes back thousands of years.

And they may not be relevant at all for anything of practical use when comes to 3x+1. In practice we cannot iterate the map ‘forever’. So just knowing whether additional solutions exist to (7.3) ought to be enough for us.

The finitist view has strength here.

27 September, 2019 at 3:18 pm

JeffTo add, an infinite solution set to (7.3) defines cycles of arbitrary finite length. So the idea of an unbounded sequence is silly from an ultra-finitist view point.

It’s almost like a nonsensical artifact of iterating the map.

When I was in school my teacher taught me that math operations are instantaneous. If this were true then it would not take any time at all for hypothetical unbounded 3x+1 sequence to reach the undefined state of infinity. So the question is instantaneously nonsensical!

I’d love to hear what Doron has to say about such sequences.

27 September, 2019 at 3:41 pm

JeffHere’s one for you,

Can you prove the number of cycles of any given length is finite?

If so, it still leaves open the possibility of an infinite solution set.

Maddening isn’t it?

28 September, 2019 at 12:00 am

Alberto IbañezNot really, Jeff. Infinity is our friend. For an odd n, in Syr-map, in an unbounded orbit, n would not be a single number, as a counterexample to the conjecture, there would be infinite counterexample numbers of the conjecture, which is exactly on the opposite side to the heuristic of the previous post “Heuristically applying the Borel-Cantelli lemma, we thus expect that there are only a finite number of counterexamples to the weak Collatz conjecture (and inserting a bound such as , one, in fact, expects it to be extremely likely that there are no counterexamples at all)”. Even more so considering that the value of k is the value of the number of counterexamples. Despite not knowing exactly the transcendentality and its relation to Collatz, for an infinite orbit, we would have an infinite collection of diophantine equations, where the infinites n of the infinite orbit are no solution, then these numbers, very speculatively, should be transcendental, and I believe that no natural number is transcendental.

Then somehow the events should lead us to the fact that if an orbit is infinite, it is infinite periodic, and that all orbits are bounded, either up to 1 or up to n, to subsequently attack the impossibility of periodic loops in 3n + 1. Very speculatively, of course. Thank you.

Another issue to keep in mind is that I think we have screwed up this comment thread. My sincerest apologies to Professor Tao, and all my respect for his work.

28 September, 2019 at 4:39 am

JeffAlberto, I agree with the concept of a potential infinity. I disagree with the concept of actual infinity.

That is why hypothetical divergent 3x+1 sequences are fascinating to me. They cross from being defined to undefined. Are they both? Is that a contradiction in itself?

And is the question and the search for an answer a complete waste of precious time?

3 October, 2019 at 9:50 am

Gastón Fernando Murillo PlúasLet’s evaluate in the opposite direction. If you come from the infinite, even if there are no unbounded orbits, there would be an infinite amount of regressive operations of the algorithm and we could never know if it would reach 1. On the other hand, show that there are no unbounded orbits in addition to 4, 2, 1 I think That would be more feasible.

11 October, 2019 at 1:34 am

Alberto IbañezHi Gaston. If I understood you, indeed, for the Collatz conjecture two possibilities remain open:

1. The possibility of orbits that escape to infinity,(for every Collatz-like maps) that is, not bounded. Current techniques seem unable to attack this problem. From my point of view, which I think is the same as @ jeff, the correct question would be, are there unbounded orbits? Exists? Starting from a natural number, is it possible that the orbit reaches infinity? I don’t know if this debate is a closed or open debate, I suppose it is open, and it certainly seems very interesting. For me, in my modest opinion, conceptually they cannot exist and every orbit would be bounded, either from n to 1 or from n to n.

2. The possibility of periodic orbits. In other Collatz type maps, you can observe the nature and functioning of these orbits, even with very small numbers. For the Collatz map we know that even a very large number does not give any periodic orbit of the form

where the only known solution is the trivial one, ,

With this advantage I propose, although I don’t know if in a correct way, this linear congruence system,

or,

,

where ,

I repeat that I don’t know if it is raised correctly, but if we can use GCD and Bezout’s identity to know that the only possible solution is the trivial one, then it is not possible that there is a non-trivial periodic orbit. Can there be a solution other than the trivial one?.

11 October, 2019 at 5:07 am

JeffYes gentlemen. As you say, the question of the existence of a divergent sequence really belongs to the philosophers, not the mathematicians. Papers like this one assume actual infinity exists and the authors believe they can somehow rigorously argue the non existence of divergent sequences. Well they certainly do not exist if we reject actual infinity to begin with.

That leaves open the possibility of more solutions to Crandall’s (7.3). We can find practical use cases for the answer to this question.

11 October, 2019 at 8:44 am

JeffPhD is a Doctor of Philosophy. To me actual infinity should be reserved for masters degrees and higher. All mention and ridiculous use of it should be footnotes in all undergraduate textbooks aside from ones for philosophy degrees. Then kids can learn about and solve problems that actually have a positive impact on society. How’s that for a political statement. Well maybe a social statement. :-).

14 October, 2019 at 7:50 am

Gastón Fernando Murillo PlúasIf the results of the conjecture were strictly n * 2 ^ x we would have an immediate inductive test, but there is a slight distortion at the beginning of the natural numbers. Although an inductive demonstration proving that odd numbers are grouped into sub sets where 2 ^ x is one of the variables for the polynomial is feasible, it is not simple.

On the other hand, the orbits will grow more the greater the number that is taken because in a sieve where all the numbers must pass through the first ordered subset of odd ones evaluated at 2 ^ x you must add the steps that the first odd number requires to reach 1. That is to say you can have a larger number than the one you take from the first subset but if you have to go through a previous number it will have fewer steps. So the number of steps for a number to reach 1 can be countless if you take an uncountable number.

But periodically infinite orbits would not exist if we take into account that the algorithm sequences are ambiguous, that is, they increase from an odd number and then descend and may then rise and fall continuously. But if the density of the increments is 0 and the density of the decreases is 1 then it cannot be returned to a previous orbit in addition to 4, 2, 1.

The calculation falls into a contradiction. Even if the density of the increments was 0 it would never reach 0 because the numbers are infinite and at some point the descent would necessarily begin taking a value greater than 0 than later if it would descend to 1. If somewhere in the descent the orbit increases again it would require a calculation with a rational result and this calculation must be greater than 1 but since the density of the descent is 1 you cannot calculate a return to a previous orbit unless it is the original orbit 4, 2, 1.

How is it demonstrated? The path is the calculation of the algorithm between the subsets of the odd numbers.

23 September, 2019 at 6:17 pm

JeffThere is potentially substantial value with this paper if it included just how awfully it handles 3x-1. It shows just how untrustworthy ‘heuristic’ intuition is. Well, provided there isn’t some other gaps of rigor.

26 September, 2019 at 3:43 am

JeffSeeing as how stuff like this paper get published on a regular basis instead of real partial progress, you have my permission to acknowledge my helpful comments. I cannot speak for the multitude of others who have helped for free.

Best of luck!

24 September, 2019 at 1:53 pm

JeffGood grief, another one

https://www.hindawi.com/journals/jps/2019/6814378/

24 September, 2019 at 1:59 pm

JeffHere’s a revision to one, but I cannot find a date.

https://pdfs.semanticscholar.org/f3c0/13d8bb641513da2a0cb84936b9ef9fc6ad46.pdf

29 September, 2019 at 6:50 am

JeffDoron opinion 111

http://sites.math.rutgers.edu/~zeilberg/Opinion111.html

To add to it,

Almost All also means Almost None.

No rigor here. Did someone really get awarded a fields medal for NOT proving anything at all?

Sounds like the award has been miserably devalued.

5 November, 2019 at 7:42 pm

JeffYeah we don’t need proofs. Who reads and understands them anyway?

10 November, 2019 at 7:06 am

Jeffhttps://sites.math.rutgers.edu/~zeilberg/Opinion174.html

Algorithms are Proofs. For example,

1. Assume Math operations are instantaneous.

2. How can we prove 3 times 15 plus 1 equals 46?

3. Answer, we use an algorithm, the most basic one: order of operations!

4. Philosophically the answer is 46 with or without us humans. And it just is.

5, notice, however, the algorithm cannot be fully evaluated until us humans give the definite form of 15.

6. 3x+1 is great, but x doesn’t tell us enough. Further, 3x+1 exists in other number systems, such as binary.

7. Finally, if 3 times 15 plus 1 equals 46 only exists because we humans exist, then divergent sequences do not exist, obviously.

Proof already inherited the earth. It’s foundation is our very survival, which depends on trust. Trust but verify.

https://en.m.wikipedia.org/wiki/Ishango_bone

3 December, 2019 at 6:01 am

JeffMath is the art of making sense out of nonsense.

“Order” of operations implies time to calculate is bounded “above” zero, even for some arbitrary object such as the universe itself. This deduction in turn implies divergent sequences do not exist as complete objects.

What really “matters” is whether the number of solutions to Crandall’s 7.3 is finite and what that number is, or that there are as many as we should ever need.

5 December, 2019 at 6:07 am

JeffOur perception of “time” is synonymous with our perception of “order”. You cannot have one without the other. And it doesn’t seem delusional to me. Hypothetical Divergent sequences are dumb and insidious mind traps. In my humble opinion:-).

9 December, 2019 at 10:04 am

Alberto IbañezHi, @jeff.You know that I agree with you about hypothetical divergent sequences. And surely many more people will agree with you, but somehow we have to shape this idea, either from the axiom of the infinite, with some logical argument, or prove it mathematically. So I hope we are encouraged to make a collaborative effort for this interesting partial result.

On the other hand, I would like to say that the recent events about eigenvectors and eigenvalues encourage me to continue thinking about Collatz, in some apparently short and simple aspect or detail that has gone unnoticed, or even, why not, that in the depths of Arxiv the answer has already been lost. Thank you.

29 September, 2019 at 7:30 am

JeffNot my field but if we say the natural numbers are defined as a complete set

https://en.m.wikipedia.org/wiki/Axiom_of_infinity

Then divergent sequences have form as complete objects, assuming math operations are instantaneous.

If we toss the axiom of infinity, then we can prove by contradiction that divergent sequences do not exist. But that goes for lots of sequences.

The great thing here is that we could still have ‘potentially’ infinite solutions to Crandall’s (7.3) without the axiom of infinity!

Any qualified mathematicians ever publish on this topic?

29 September, 2019 at 8:35 am

JeffTo me, the axiom of infinity does not define infinity per say. But one could say it almost defines infinity.

Has anyone ever assessed the purely number theoretical results which cannot be proven without the axiom of infinity?

30 September, 2019 at 2:48 am

Alberto Ibañez@jeff What do you think of my idea about the transcendentality of the infinite numbers (counter-examples) belonging to an unbounded orbit? If they are not a solution to infinite diophantine equations, perhaps they could be a solution to another diophantine equation, but then they would belong to a bounded orbit.

About unbounded or infinite orbits and some untold variants of Conway, Professor Tao commented in his previous post “… that the examples of undecidable recursions of Conway’s type are (as far as I am aware) examples that tend to have an output larger than the input “,” it doesn’t seem like there is enough time to do any undecidably complicated mathematics in the interim. Of course, this is not a rigorous proof of anything. “But for unbounded orbits, taking into account the infinite iterations, not only iteration after iteration, if it seems that it could fit into being undecidable, hence the difficulty and the absence of appropriate techniques to solve it. If arithmetically, algebraically, topologically, geometrically, … were undecidable, then, perhaps, it could only be decidable under some kind of logical axiom

30 September, 2019 at 5:00 am

JeffAlberto, pi is transcendental, which just means it is not a solution of a nonzero polynomial equation with integer coefficients.

Who cares? So maybe it is a solution to some polynomial with at least one coefficient of the summands equal to, say, 2/3.

What a weird fetish. And good for nothing of practical use.

Anyway, a divergent sequence starts from a finite, meaning defined, positive integer. And since math operations are instantaneous and we admit the axiom of infinity, the sequence itself ‘almost’ has form. But there is no last element, and no repeated elements, so there is no form…

With no form, which is what Terry proposes by abstracting away special numbers like 2 and 3, anything goes. So yes, I suppose infinite iteration of the 3x+1 map could give a transcendental output.

30 September, 2019 at 6:25 am

JeffTo add, almost all real numbers are transcendental. But almost none of them form!

Ha! Seriously, this is modern mathematics.

30 September, 2019 at 8:50 am

JeffAgain this is why the hypothetical divergent sequence is fascinating to me. The 3x+1 problem has a little of everything in it. And the iterations almost give it life.

What’s weirder yet, is Big Bang theorists are seemingly ignorant of the fact that their mathematical models of our universe use the axiom of infinity.

1 October, 2019 at 3:43 am

JeffIn our minds we iterate the 3x+1 map a finite number of steps and then conclude that the process may hypothetically never EQUAL one. We do it with a single number and we do it symbolically with x. Recall x is a member of a set, and thusly ‘represents’ a single number. But x is not as ‘well defined’ as say the number 1.

So it really doesn’t matter whether the set of natural numbers is complete, in other words, that actual infinity exists. Potential infinity allows us to give form to as many numbers as we should need, where memory space and time are the only limitations.

To me if a divergent sequence were to exist, who cares? Besides where exactly would it exist?

3 October, 2019 at 10:03 am

Gastón Fernando Murillo PlúasSo the first step would be to demonstrate that divergent orbits are finite and being finite would necessarily involve a convergent orbit. So far this would serve to demonstrate that the convergent orbit does not involve another divergent orbit instead of ending in 1 I do not see a clear path.

3 October, 2019 at 9:01 am

AnonymousLet be the set of positive integers which have finite Collatz orbits.

Let denote the length of the Collatz orbit corresponding to any integer . Is it possible (by these methods) to give an EXPLICIT bound for for almost any ?

3 October, 2019 at 11:33 am

Gastón Fernando Murillo PlúasSeparating them into ordered subsets yes, but only for the number of steps from an odd number to another odd number using 2 variables. For the number of steps up to 1 I think it involves many more variables.

5 October, 2019 at 7:29 am

notyetreadyHeuristically, it is conjectured that the total stopping time for all sufficiently large and , provided that the an odd is mapped to in a single step. Off course, no explicit upper bound can be proved up to now, at least for a positive density of the integers.

7 October, 2019 at 8:22 am

Gastón Fernando Murillo PlúasHeuristically according to who?

7 October, 2019 at 1:56 pm

notyetreadySee this paper of Lagarias and Weiss, dealing with stochastic models:

https://www.jstor.org/stable/2959662

See also https://projecteuclid.org/euclid.facm/1484794814

8 October, 2019 at 9:49 am

Gastón Fernando Murillo PlúasI read it. I find no sense in decreasing one iteration for each time an odd number is calculated. The amount of iterations has nothing to do with the initial value with which it begins to iterate. But let’s take an example of the method used, this is taking (3x + 1) / 2 as a step.

I can take the 1,628,896,171,349 that would be found at 14 iterations of the next odd number calculated, that is 298,259,797 that would be found at 14 iterations of the next one that would be 54,613 that would be found at 15 iterations of 5 totaling 43 iterations.

This is taking high potencies. Now let’s take low powers. From 8,097 to 5, I would have 43 iterations always calculating the next odd number with low powers, which is from 2 ^ 1 to 2 ^ 4 maximum.

But what if I take 43 iterations directly through 5? Then I would have to take the number 14,660,155,037,013 which is much greater than 1,628,896,171,349.

Of course it will be greater, logically that you will always have a greater number when you use a greater power at a value that you calculate twice with powers in half and worse with the difficulty of a 3x + 1 algorithm where you cannot count on 1 in 3 odd values to continue. The rest of logarithmic calculations on peaks of iterations is constant and inductive. But that does not mean that there cannot be an unbounded or infinitely divergent orbit, even if the latter is false.

9 October, 2019 at 6:53 pm

osobliwy_nickTo determine if there are divergent sequences, we must realize a fact that there are numbers – “engines”, that can accelerate a given string to infinity. And there are very few of them. These numbers are:

2^n*j-1

2^n*j-5, 2^n*j-7, 2^n*j-10

2^n*j-17, 2^n*j-25, 2^n*j-37, 2^n*j-55, 2^n*j-82, 2^n*j-41, 2^n*j-61, 2^n*j-91, 2^n*j-136, 2^n*j-68, 2^n*j-34

The numbers of this character always generate a number greater than themselves after n steps in the collatz sequence. Any other numbers of the form 2^n*j-k will not satisfy this relationship. Each 2^n*j-k number gives a number smaller than themself after n steps. Therefore the divergent sequence must regularly reach some number of characters:

2^n*j-1

2^n*j-5, 2^n*j-7, 2^n*j-10

2^n*j-17, 2^n*j-25, 2^n*j-37, 2^n*j-55, 2^n*j-82, 2^n*j-41, 2^n*j-61, 2^n*j-91, 2^n*j-136, 2^n*j-68, 2^n*j-34

Is it possible? I don’t know, but if we answer this question, we will solve the problem of divergent sequences.

10 October, 2019 at 6:10 am

AnonymousDear Pro.Tao,

After I” drank” beer “Collatz”, I felt the smell was very delicious. I want to drink beer “Twin” now. Hurry up! Sir. I am very thristy now.

Always forward to Sir,

Best of luck!

29 October, 2019 at 2:51 am

hoooblaLet denote power set of (set of natural numbers). for n iterations is denoted by .Does there exists n such that there is bijection from to ?

31 October, 2019 at 2:53 am

robfrotRob Frostno, there is no ceiling on $n$ because e.g. $(2^{2n}-1)/3$ is a solution.

31 October, 2019 at 2:31 pm

Robert WhiteI have a computer program (visualizer) and computational analysis that proves the conjecture but I don’t have the math to express it in formal terms. The entire conjecture can be summarized as “hammering off significant digits destroys information”.

The insights come from the vector operators used in graphics routines where you load multiple scalars into a wide register and then work on (e.g. multiply) them all at once.

In essence, when viewed as an electronic computation in a register of infinite width you can ignore all the divide-by-two operations; in electronic computation dividing by two is just register shifting. The only reason to divide by two is to align the destructive +1 term with the least significant set bit in the register.

So once you replace the conditional divide-if-even and the aligned +1 with a vectorized operator to find the least set bit and add it into the term all the distracting “spirals” disappear.

The actual transformations at each step become

(1) Expansive Term -> N=N+3

(2) Destructive Term -> N+=(1<<count_trailing_zeros(n))

Now you have a finite state machine, a la Conway's game of life.

There are only four (if memory serves) possible bit patterns at the most significant position that the by which the Expansive Term can extend the value.

The Destructive Term can remove any number of bits up to but excluding the most significant bit.

There is no feedback system where bit N can affect any bit M where M is less than N.

Only a highly ordered least significant bitset can delay the destructive term, forcing ti to only consume one bit, but that ordered bitset creates a smaller, disordered bitset at its upper extent when processed by the Expansive Term; this means that the ordered bitset cannot propagate its properties indefinitely.

The result is that there can exist no bitset such that the Expansive Term can consistently produce as many extension bits as the Destructive Term consumes.

The visuallizer is super simple, but it's at home and I'm at work.

I can demonstrate all the validity of all the algorithmic transformations, including a version of the visualizer that works on the native (untransformed) original form of the function exactly as originally written.

I've been sitting on this for years but I don't know any mathematicians and everybody assumes the extra-disciplinary ideas are Dunning-Kruger madness.

1 November, 2019 at 3:31 pm

Robert WhiteHere’s the visualizer I discussed above. It uses the unmodified conjecture and does several simple things.

(1) It prints the binary from left-to-right least-to-most significant bit

(2) I counts up the number of times the term has been divided by 2.

(3) Puts in leading pad characters matching the number of times the divide/shift operation has taken place.

Arguments are [ [ ] ]

By default the fill character is underscore, but using a zero is particularly illuminating.

In the output mode you can use any value 1 through 7, lowest bit is “classic output mode” that shows the base conjecture result, second bit is show immediate value after multiply, third bit is show value after increment.

The default display value is six (6) which shows the condensed visualization without the “shift spirals”.

https://onlinegdb.com/S1c-3Vccr

Notice the montonic nature of the expansion, if forms a line of near constant slope. The destructive term has no such constraint.

The most interesting values are any 2^n and (2^n – 1) input. The former is an instant collapse to just one set bit, while the latter produces the longest possible sequence single-bit destructive delay possible for any number less than 2^n.

You just have to be ready to see the state machine instead of the divide-by-two spiral.

NOTE: visualizer not for non-positive numbers.

1 November, 2019 at 3:39 pm

Robert WhiteSelf-reply…

My appologies, the web tool seems lock the arguments when I share the block. You may need to copy the code and paste it into a fresh project page.

The above block will run 1023 in classic mode, where the output is the classic conjecture “spiral”.

The below will run 1023 in the proof-visualization order.

https://onlinegdb.com/SkTCeH99H

Compare the leading and trailing line slopes.

1 November, 2019 at 3:50 pm

Robert White/sigh : arguments are [ value [ mode [ fill character ] ] ]

I wish the forum allowed editing, the first try ate the definition because I used angle-bracket like you do in linux manual pages.

1 November, 2019 at 5:20 pm

Robert WhiteAh, there’s that assumption again. No arguments against, just automatic downvote. 8-)

The data clearly shows that the Expansive term can only add one or two bits to the state machine while the Destructive term can remove any number from 1 to all-but-one bits in a single operation; and the two operations alway alternate one-for-one.

There is no possible bit pattern between the leading and trailing bits that can cause expansion by X1 or X01, and there is no pattern that sustain the all-ones pattern that prevents the destruction of more than one per cycle.

The internal disorder of the bits between the leader and trailer cannot stop the decay because a higher-order bit can never influence a lower-order bit in any way.

You just have to compare the pre and post increment values, which is where the information content of the number is discared/destroyed.

I’ll stop now.

1 November, 2019 at 9:24 pm

HCLWhy is the title of the paper not “Almost all Collatz orbits attain bounded values”?

My second question is:

Why is the title of the paper not “All Collatz orbits attain almost bounded values”?

Thank you!

7 November, 2019 at 7:36 pm

JeffWhy all the press like in popular mechanics about a preprint that doesn’t prove anything at all on 3x+1?

Tell you what though. There has been a spike in arxiv preprints the past few months. Even my preprint picked up another citation. But I actually proved some theorems… but who cares :-).

6 November, 2019 at 8:52 am

y.y.The page “Residue-class-wise affine group” in wikipedia writes “…Collatz conjecture, which is assertion about a surjective, but not injective residue-class-wise affine mapping.” Certainly, {2N_0+1} maps to {2N_0+1≢0(mod.3)}. but its inverse mapping, which is able to be bijection by rcwa with matrices. and I have found that. There can be defined easily “almost all odd” goes to small of itsef in n times iteration. and then also can be defined ￢”almost all odd” odd goes to small of itself in m times iteration by set theoritical way.

8 November, 2019 at 7:56 am

y.y.and the equation(because there exists a bijective map between x and f^-1(x)) contains S3.

13 November, 2019 at 10:41 pm

Spesialcoklat WA:08984230641By following pde coprogress dn/dq=(3n+2)/2^q have solution ln(3n+2)^(1/3)=-1/(2^q.ln2)~ln(2^2^q) then q~log2log2(3n+2)^(1/3)

15 November, 2019 at 7:03 pm

RudiLet be defined by where and , and is a Mersenne number.

-index may be found by finding the highest exponent that divides . This can also be done by the bitwise exclusive or operator:

Or we define the function as:

Let :

where .

This is my first post ever with latex code on wordpress, so hopefully it is displayed correctly. The problem is to prove that one of these functions at some time in their trajectory reaches 2^x (some power of two), Or that all the remaining factors remaining are just twos.

16 November, 2019 at 2:31 pm

Daniel ParryI was playing around with this problem for fun and I found that the Syracuse map you described pops out of using characteristic functions to run the Affine map backwards. It seems to describe the minimal element in the limit as n\to \infty.

The sequence \vec{a} appears to be representing a path on the tree run in reverse. The minimal element of the cycle, as being part of a cycle, seems to imply that the a_i must be cyclical if it were to describe the minimum element.

Would this help in improving the analysis?

19 November, 2019 at 11:56 pm

isaac morin order to solve this problem you first need to get to the cycle bounds

like this:

Collatz Conjecture – Cycle bounds

x = number of even values in a cycle

y = number of odd values in a cycle

x+y < (8/9) * floor(1.5^y)

then you are lowering the limit even more …

to get to

positive cycles:

x = roundup ( y * ln3/ln2 )

negative cycles:

x = rounddown ( y * ln3/ln2 )

then you need to get the formula for the minimum cycle with the lower and higher values to be asa closest as possible

and then you can solve it :)

1 December, 2019 at 8:10 am

GeorgiyBest instrument to prove Collatz Conjecture is Canonical Collatz Tree

All details described in book

Proof of the Collatz conjecture (Problems – Ideas – Solutions) Amazon March 15, 2019 by Georgiytyshko Tyshko

Any questions and critics you may tell in

Howwewanttolive.livejournal.com

12 December, 2019 at 7:41 pm

vznvznhi TT fyi all heres a nice writeup in quanta mag

“Mathematician Proves Huge Result on ‘Dangerous’ Problem” https://www.quantamagazine.org/mathematician-terence-tao-and-the-collatz-conjecture-20191211/

delighted that you returned to this subj after ~8yrs. congrats on the recent results. a little annoyed with the tone of the article, but it probably does reflect widespread social anxiety about the problem. myself have called it like a “femme fatale”. there seems to be a semiconscious assumption of “all or nothing” on this problem even by the leaders in the field. what is wrong with incremental results? in a word, nothing!

collatz is an outstanding/ exceptional problem to work on. even if a researcher can see that a solution seems unlikely, new insights into the problem not seen elsewhere are not extremely difficult and feel theres no shame in pursuing them, quite to the contrary think its as honorable as the best of mathematics. it seems some of the aversion to this problem is that it hasnt been connected to any deep theory. but on the other hand, why not make the opposite conclusion, given that it doesnt seem to connect to anything known, that there must be deep *future* theory around here somewhere, that this is just a tip of an iceberg…!

my other complaint (and not pretending either that many are listening, lol) is that almost nobody talks about “fractals” in reference to this problem. there are some isolated exceptions. after many years of banging on it with computational experiments (and its great to hear you are not averse to them yourself) the fractal nature seems like a foremost aspect to approaching/ understanding it.

could write far more and have elsewhere, encourage visitors/ feedback https://vzn1.wordpress.com/category/collatz/

13 December, 2019 at 2:13 pm

Alberto IbañezI still think about the numbers of the form (8) of the previous post

For orbits that reach 1

, they have this form.

For periodic orbits

, where k n numbers have this form

For unbounded orbits, none of the above conditions are met for infinite n numbers.

I have known this notable product, Difference of Nth Powers, which has a certain resemblance, with the problem at hand.

Could it be useful for the Collatz conjecture?

24 December, 2019 at 3:24 am

Alberto IbañezThe intention of this strategy is to demonstrate that there are no unbounded orbits. The way to achieve it would be to know if it is possible to transfer the properties of the notable product difference of nth powers, that is, the form, (8), to any possible Collatz sequence. If there is a mechanism that converts the difference of nth potency into a Collatz sequence, and there is always an n such that the difference conserves the form (8), then perhaps, it would be possible to affirm that all the orbits are bounded to the nth power.

I have not found that mechanism, but perhaps for some of you, it is easier to find that mechanism, or of course, to rule out that possibility.

I present some examples in case someone sees how a difference of nth power is transformed into a sequence of Collatz, where the difference maintains the form (8).

For

…

For

…

For

…

For

…

For

…

…

**orbits belongs to numbers in red color.

***numbers with form (8) are

and numbers with form

it’s obvious, but maybe may have relevance. Thanks

2 January, 2020 at 4:45 am

Alberto IbañezExamples of some know orbits

For

…

For

…

For

…

For

…

For

…

…

2 January, 2020 at 7:16 am

Alberto IbañezNow let’s look and compare some known orbits.

Is it possible to establish a general mechanism that relates the difference of nth power and the orbits of Collatz? Is this mechanism trivial or does it provide us with no interesting information?

At the moment I can not visualize this general mechanism, although obviously these are known orbits that end in 1, could we establish that there is always an n that meets equality and the difference preserves the shape? Could it be used to rule out the existence of periodic orbits? Thank you.

29 January, 2020 at 12:04 pm

Alberto Ibañezhttps://drive.google.com/open?id=14de4QiGD147d1yIfnrupbTEtB2E-3idF

Hi everyone. Although there is a new post by Professor Tao, I wanted to close my approach to the conjecture with a basic scheme that summarizes my approach. The numbers of the form (8) share structure with the difference of nth power, which to simplify I call it TCR, Tao-Collatz Reminder.

The conjecture needs to answer two questions:

-1. Are there periodic orbits?

-2. are there infinite orbits?

We know that the conjecture is true for many values. All reach 1 and there are no periodic orbits (except the trivial).

This approach to the conjecture through the notable product difference of nth power could serve to illustrate the mechanism of why the orbits reach 1, and also how the mechanism of the periodic orbits works and why they cannot occur for the powers of 2 and 3 .

Once this question was resolved, one could then attack the existence or not of infinite orbits, or at least, do it independently.Thanks

13 December, 2019 at 11:45 pm

Smith fosterHow about this way?

If it’s possible to prove the equation

“2^a+(2^b-1)/3+3c=n”

is correct, which means ,to each positive integer “n”, there is a series of numbers “a” “b” “c”(they are all positive integer, and they are not related to each other ) to make up the “n”.

Because when you list the numbers from “1” to a larger number according to the forming order, there is no branch until it’s “16”, either “5” or “32” is ok to result in “16” , and if you continue to list the numbers, you’ll find these three basic forms are ok to result in “1” .

Actually I’ve found there are some mistakes this way, but does this conception work?

15 December, 2019 at 8:52 pm

thorThere are 8 kinds of odds for 16k+1, 16k+3, 16k+5, 16k+7, 16k+9, 16k+11, 16k+13, 16k+15. If you can prove after some steps, the 8 kinds always appear in same probability, the odd numbers will keep getting smaller. The Collatz conjecture can be proved.

16 December, 2019 at 1:45 am

Giả thuyết 3n+1 | REDSTAR-BLOG DÀNH CHO TOÁN[…] đây nhà toán học lỗi lạc Terence Tao vừa có một bước tiến lớn sau vài thập kỉ cho giả thuyết 3n+1 hay còn được gọi là giả […]

16 December, 2019 at 10:30 pm

Matt: Comments And Collatz Conundrum - RSSFeedsCloud[…] always said that comments are the best part of blogging, but this is a particularly cool example. Here’s Terence’s latest post on it, with an excellent comment thread […]

18 December, 2019 at 12:50 am

面对数学史上最简单的未解之谜，陶哲轩给出了几十年来最重要的证明！ - 程式筆記[…] Almost all Collatz orbits attain almost bounded values […]

18 December, 2019 at 3:02 pm

Michael Mark RossCollatz sequences are essentially a parlor trick. While I’m sure Professor Tao has uncovered much of value in his recent paper, the 3x+1 problem has no intrinsic value. I can state the solution in its simplest form as just this:

Given three arithmetic operations, a, b, c:

a = ((n + 1) * (3 / 2)) – 1

b = ((n – 1) * (3 / 4)) + 1

c = (n – 1) * (1 / 4)

For every odd number n, either a or b or c is a whole odd number. That’s it – everything else is embellishment and ornamentation (in particular, the even numbers).

For visual thinkers: https://drive.google.com/file/d/1iY7HMO0BJbdw9EQX3BnYGvXDyBNQ1ITH/view

18 December, 2019 at 6:08 pm

JeffDon’t think we’ll see revision 3 any time soon. But for you, what about 3x-1?

18 December, 2019 at 4:09 pm

Michael Mark RossI must rephrase that for the sake of proving I can write grammatical English: “For every odd number n, only a or b or c can be a whole odd number.”

19 December, 2019 at 2:45 am

JeffYou have to prove that the usual two piece 3x+1 function is ‘equivalent’ to your three piece function on the odds. This is the so called ‘transference’ Terry wants for his preprint, but is impossible to achieve in way one can extract trustworthy results from with a probabilistic approach. So prove equivalence, Then you can work with your new function and rigorously prove stuff to knock our socks off with:-). It is not enough that only one of either a, b or c is odd for a given odd input.

19 December, 2019 at 10:24 am

JeffHow many odds have you tested? Any professional number theorist would perk up at an opportunity to explain why the two mappings coincide on the odds under repeated iteration.

19 December, 2019 at 10:45 am

JeffAlso, proving equivalence in this case and for larger classes of functions may be really helpful in and of itself. But you will still be stuck trying to prove the non existence of non trivial cycles for 3x+1. And your a results in an increase to the sequence whereas b and c give decreases.

But your observation is really good. Glad you have kept pushing it into the public eye!

19 December, 2019 at 12:23 pm

JeffCharles Cadogen already proved your c. It should not be too hard to prove your a and b and establish equivalence.

19 December, 2019 at 12:40 pm

JeffHmm maybe not. 13 maps to 5 under 3x+1 but it maps to 3 under your map. Am I missing something? This is why I asked how many odds you have checked.

Nonetheless, something of value may truly be found in your observation. Calculations should guide you here.

20 December, 2019 at 7:46 am

Sharmila KopanathiDear Prof. Tao and the rest of the research community,

I apologize for barging into a research discussion forum to seek your urgent help, but such is my current circumstance. I left the US for India in 2013 to work on a couple of unsolved problems on my own. I got some preliminary results related to integer factorization in Oct 2017. Since then, my laptops have been taken over, I was put on 24/7 surveillance and my house has been bugged. They have practically taken over my life, preventing me from enjoying even momentary solitude to continue my work. They stole my past and present work. They started using advanced psychological torture techniques against me taking advantage of my inability to cope due to severe anxiety associated with this situation. They started commenting online about my most private activities. I experienced sudden shocks to my brain several times during these past 5 years. I experienced facial paralysis and reduced vision. This terror campaign continues to this day. They have recruited my neighbors as well to harass, humiliate and invade my privacy 24/7 from close proximity. They destroyed 5 years of my precious life. The local police, the FBI , IC3 have not been of any help. I tried sending you, Profs. Manindra Agrawal,, Manjul Bhargava emails. I even spoke to Prof. Agrawal a couple of times. He even acknowledged that he received my email. I have since been blocked from contacting anyone n the US, Please help me escape this terror campaign. Thank you. My gmail is not secure. Nor is my twitter account.

Sincerely, Sharmila Kopanathi

20 December, 2019 at 1:08 pm

Michael Mark RossThank you for the generous response to my post. Here is essentially the same thing (I hope my latex works) as a function using congruence classes.

The table should show why this has to be an infinite function.

https://drive.google.com/file/d/1yDClElWLnm1H-dsa_KeBorcl44A8yNfY/view?usp=sharing

(You’ll notice that input a, b, c and output a, b, c have a fixed combination of 16 pairs.)

P.S. I’m an empiricist. I can’t provide proof, just observation.

20 December, 2019 at 6:04 pm

JeffWell, the sequence of odds matches for n=27. What other values of n give matches. Just look for a pattern. The proof will follow from a pattern. You may end up with an infinite subset. That would be nice. Do all multiples of 3 match? For example…

20 December, 2019 at 6:18 pm

JeffWell, double check your calculations for n=27. Not all match.

21 December, 2019 at 3:39 am

Alberto IbañezHello @michael @jeff. I do not understand the strategy.Could you please explain as simple as possible?. Later I will try to explain my approach about notable product difference nth power and the form of odd numbers

20 December, 2019 at 1:13 pm

Michael Mark RossHere is the function: https://drive.google.com/file/d/1V0zV1P7tY7f2qtkobhEIlFs2vUqvEo0l/view?usp=sharing

21 December, 2019 at 1:46 am

Michael Mark RossNot quite sure I understand what you’re saying about 27. Nothing unusual about 27 except it’s divisible by 3 – and therefore would not occur in a 3x+1 sequence. Such numbers belong to a proper superset of the odd members of a 3x+1 sequence. The third congruence class in fact contains every odd number. So yes every odd output number is repeated twice, but for different inputs. However, that’s where it becomes interesting in showing why cyclicality is possible for 3x>1, but not for 3x+1.

21 December, 2019 at 5:44 am

JeffRepeated Iteration of the 3x+1 map starting with x=27 gives a subsequence of odd numbers which is,

27, 41, …, 1 where upon the 1 repeats.

I thought the sequence you have in your spreadsheet has some mistakes. But now I think you are trying something different. What I’m suggesting is you list the elements of your sequence next to the one given by 3x+1.

Then see which iterations match and then look for a pattern. So you are working visually…

21 December, 2019 at 6:00 am

JeffThe only way you can use your function to make rigorous deductions about 3x+1 is to show exactly where they behave the same. So I’m trying to point you in that direction.

Of course a probabilistic approach is doomed from the get go :-).

21 December, 2019 at 1:49 am

Michael Mark Ross(Repeated twice when tabulating – obviously not twice in sequences.)

21 December, 2019 at 8:43 am

JeffIt would be a big task, but an addendum to the various outdated surveys on 3x+1 listing proof strategies in plain language would be very helpful, in my opinion.

List a strategy, then state what worked and what failed and why. There are bound to be hundreds of strategies. A big Class includes the various probabilistic approaches. They cannot work! It is not even debatable.

In this way we can track things, avoid making the same mistakes more than once etc. But speaking from personal experience, one has to be able to convince themselves of when a given strategy fails to hold promise!

21 December, 2019 at 9:18 am

Michael Mark RossJeff, do you understand the unvarying and by definition regularity of the table? https://drive.google.com/file/d/1yDClElWLnm1H-dsa_KeBorcl44A8yNfY/view. Further you can demonstrate the divergent series (algroithmically here) is the same as the convergent series, which is unique for a given n:

Do

a = ((n + 1) * (2 / 3)) – 1

b = ((n – 1) * (4 / 3)) + 1

c = (n * 4) + 1

If a = Int(a) Then

n = a

ElseIf b = Int(b) And Modop(b,2) 0 Then

n = b

ElseIf c = Int(c) Then

n = c

End If

Loop

Then you need only show that no two a or bs can point to the same c, since c is a series of every odd number. You do this by looking at contradictions (loops) for any case pf 3x>1. These are easy to find. What’s the difference? It’s quite subtle. I have the answer to this.

Anyway, I truly appreciate your interest, and there are always communication difficulties when essentially texting. All the best!

21 December, 2019 at 1:18 pm

JeffOkay, I’m going to put forth a real effort to see what you are seeing. I checked your sequence of odds starting with 27. It contains every single odd given by 3x+1 and in the exact order. However, it also contains extra odd terms,

111,607,769,81,15 and 3, and in that order. Do I have that much correct?

21 December, 2019 at 1:22 pm

Jeff111,607,769,81,15, 13, and 3

21 December, 2019 at 1:55 pm

JeffAnd these are exactly the values for which your function says to subtract 1 and divide by 4. Okay, so your c or your otherwise part of your function should instead read: if n is congruent to 8 modulo 5. I’ll look at it more later:-).

21 December, 2019 at 1:56 pm

JeffI mean 5 modulo 8…

21 December, 2019 at 2:29 pm

JeffBack again, for your a,b and c you need to say

n congruent to 3 modulo 4,

n congruent to 1 modulo 8, and

n congruent to 5 modulo 8, respectively.

This helps make it clear that it is a function on the odds because the Union of the sets given by those forms is all of the odds. Next you need to see what the range of your function is. Can you do that?

21 December, 2019 at 5:01 pm

JeffOnce you check the range you’ll see an easier way to write your function by comparing it with 3x+1.

f = 3n+1 for n congruent to 3mod4 or 1mod8

= (n-1)/4 for n congruent to 5mod8.

So iterates of your function are the same as 3x+1 for all odd values apart from ones of the form 8x+5.

So super interesting. Wondering if anyone else is going to chime in?

21 December, 2019 at 5:28 pm

Michael Mark RossAs I think you see, the superset numbers are all in C, divide by 2 twice. More here: https://www.quora.com/Why-is-the-Collatz-conjecture-so-resistant-to-being-proven-or-disproven-I-would-think-that-a-solution-lies-along-the-convergence-to-powers-of-2-path/answer/Michael-M-Ross

21 December, 2019 at 5:31 pm

Michael Mark RossWith respect to congruence, it’s very clear-cut if you see the three operations in the function must be taken sequentially: https://www.quora.com/Why-hasnt-the-Collatz-conjecture-been-proven-yet-when-it-sounds-so-logical/answer/Michael-M-Ross

21 December, 2019 at 7:26 pm

JeffWell, written in the way I suggest may allow you to prove whether subsequences of just the odd values of 3x+1 sequences are in fact subsequences of those given by your function for every odd starting value. That’s what you want to know.

22 December, 2019 at 4:08 am

JeffWait a minute, I goofed trying to translate it. Your function is

f = (3n+1)/2 if n is congruent to 3mod4

= (3n+1)/4 if n is congruent to 1mod8

= (n-1)/4 if n is congruent to 5mod8.

My comment still applies. If you can prove what I suggest, then you will have established ‘equivalence’.

At that point everyone would want to revisit old proof strategies with your new function. Because your function ‘would’ amount to a major simplification.

If you cannot prove it, calculations may help show why not…

22 December, 2019 at 4:21 am

JeffAnd a note to the readership. It would be unethical to dance off into the sunset with Michael’s observation and try to pass off whatever immediate results may follow as your own.

Please give Michael a chance to prove or disprove the desired equivalence exists.

24 December, 2019 at 12:32 pm

JeffMichael, it is a tad tricky but not too hard to prove. Your function is equivalent to 3x+1 in the way I stated above. Try to prove it. Hint: the only tricky part is to check what happens with starting values of the form 32n+5.

Merry Christmas!

Your name deserves to be coauthor on every immediate publication that should follow using your observation.

It may not help us settle the Conjecture, but it already constitutes legitimate partial progress!

Good job sir.

25 December, 2019 at 12:10 am

面对数学史上最简单的未解之谜，陶哲轩给出了几十年来最重要的证明 – 克拉茨 – 每日要闻[…] Almost all Collatz orbits attain almost bounded values […]

25 December, 2019 at 5:23 pm

E.xu (@Exu16749831)1 Collatz Process and Inverse Collatz Process are both Deterministic Processes

2 Collatz Process has only One Cycle the Trivial Cycle and Inverse Collatz Process has No Cycle

3 Two Collatz Processes can only Intersect Once by Merging Into Same Collatz Process … Two Inverse Collatz Processes do not intersect .. A Collatz Process and A Inverse Collatz Process can only Intersect Once ..

4 Inverse Collatz Map maps a Collatz Process with n tuples inverse-surjectively to roughly n/6 Inverse Collatz Processes

5 suppose there was a Collatz Process with Infinite Tuples then there must be a Minimal Tuple confining the Collatz Process .. so the Maximal Tuple of the Collatz Process goes to infinity

6 by abusing Heuristic Argument it can be presumed that the Sizes Of Steps Of Collatz Process Converge .. so it can also be Naively Presumed that the Size Of Steps Of Inverse Collatz Process Diverge …

8 Suppose there was Collatz Process with Infinite Tuples and Minimal Tuple m .. Naively the Sizes Of Steps Of This Collatz Process converge to 1 after steps .. Use Inverse Collatz Map to Map this Collatz Process Inverse-Surjectively to roughly m/6 Inverse Collatz Processes with Infinite Tuples and Minimal Tuple m … Pigeon Hole Principle says that This Collatz and those Inverse Collatz Processes Must Intersect More Than Once … which can be seen as Proof By Contradiction ..

26 December, 2019 at 12:09 pm

Jesse NochellaI made a Wolfram Demonstration on the Inverse Collatz function about 10 years ago.I know proofs can be easy to some. Lets just consider.the inverse n/2 -> 2n. we know this generates all powers of 2. Okay, so what’s the first 3n+1 -> (n-1)/3 we do to every other power of 2 as we go up the chain? It creates a repeating binary pattern of 101010101… depending on how many powers of 2 it has. The collatz conjecture can be proven by saying that you can generate every natural number with this tree sequence. Therefore every (n-1)/3 generates a class of numbers and every 2n can augment them,

There is thus a mapping to the sequence of 1’s and 0’s that correspond as to whether you used 3n+1 or n/2 in the sequence to every natural number and there is a pattern to it.

26 December, 2019 at 2:59 pm

michaelmrossJeff, try this:

https://docs.google.com/document/d/1qwgmMbmC7emrbuZQLVCtOWFPDuxd7UDXxOkpnCQ2GRw/edit?usp=sharing

27 December, 2019 at 8:07 am

JeffHi Michael. It’s very hard to read for me. You’ll get more mileage with it if you write the function as I suggested sir. As sets, the intersection of the forms 4n+3 , 8n+1 and 8n+5 are empty. And the Union is all odds. So this notation alone replaces several paragraphs and your table. No need for the algorithm or to track three columns of calculations as examples and so on. You just say repeated iteration gives…

27 December, 2019 at 9:54 am

JeffMichael. Here is a link to paper you can use as a guide to help you with notation and a proof. You are working in the forward direction just like the author here is

https://www.fq.math.ca/Scanned/40-1/andaloro.pdf

By proving equivalence as stated above you will have that nonexistent nontrivial cycles from repeated iteration of your map implies no nontrivial cycles from iteration of the 3x+1 map.

You still have to prove stuff with your map. At worst it will give us new insight. At best it will give us a way to settle the Conjecture. So it is a great observation.

It replaces the even numbers with some odd numbers.

27 December, 2019 at 4:16 pm

michaelmrossJeff, that paper is too advanced, too elaborate, and too long for me. I see this as a very thin problem at its foundation – as simple as “a,b,c” in fact*. That’s why I have clarity on it. My little paper shouldn’t be hard to read – I’m disappointed!

Let me summarize what I said:

— I initially state all sequence steps conform to a function with three outputs: a,b,c. I also show an algorithmic equivalent based on there being 1-in-3 whole numbers for all outputs.

— Then I demonstrate that the operations that produce the three outputs conform exactly with what can happen with division by 2 in the conventionally stated 3x+1 problem – by analyzing factors of 2 (and 3). Note that the nonobviousness of this approach is because I’m looking only at the odd numbers but performing the “trick” of a transform back to even.

— Having shown there can only be three outputs by definition, I show the equivalence of results for 3x+1 and a,b,c. I also provide a table to clarify the relationship between odd and even numbers and factors – and that the three outputs for sequential odd numbers (n*1.5, n*0.75, and n*0.25) repeat infinitely.

It was your suggestion to find an equivalence to the a,b,c function – and that turns out to be the factors of 2 for n-1 and n+1. Thanks!

* When this is generally realized, it could be a singular embarrassment to mathematicians.

27 December, 2019 at 5:41 pm

JeffThey embarrass themselves by handing out awards to folks who almost prove stuff, but who don’t really prove anything of merit or usefulness. The author of that paper really proves stuff, but pays lip service to references that don’t.

His approach and notation is exactly what you want to use if you wish to reach a wider audience. But this is just my suggestion. I can’t help you anymore than this Michael.

Wishing you all the best!

27 December, 2019 at 6:29 pm

michaelmrossPleasure talking with you Jeff!

1 January, 2020 at 3:06 am

Maths studentDear Prof. Tao,

I hope that nobody will mistake the following for an attack, but it seems as though current mathematical methods in additive combinatorics and related subjects are mostly adequate for tackling qualitative phenomena, instead of quantitative ones. The most important problems you’ve solved seem to be qualitative ones, instead of quantitative ones.

W/BR

1 January, 2020 at 8:56 am

Terence TaoIn analysis (including additive combinatorics) there is always a tradeoff between the quantitative strength of the results obtainable by current theory, and the breadth of that theory; and to make progress we need people working at all locations of the frontier of this tradeoff (and interacting with mathematicians at other locations on the frontier). I actually view my research as sitting roughly at the midpoint of this frontier; on the one hand a fair part of my research concerns taking some general but very qualitative results obtained using such “soft” methods as ergodic theory or compactness methods, and converting them to bounds that are quantitative but rather poor (e.g., exponential or even tower exponential in nature, and often with implied constants that are not explicit, and sometimes even ineffective). On the other hand the type of results I and my coauthors produce have sometimes been made more quantitative by other authors. For instance, several years ago Tamar Ziegler and I used ergodic theory and nonstandard analysis methods to prove the first concatenation theorems for Gowers type norms, in which control of a function in many local Gowers norms could be concatenated into control in a single global Gowers norm. The arguments were somewhat difficult and entirely qualitative. However, recently Sarah Peluse and Sean Prendiville have found much more quantitative Fourier-analytic methods to establish concatenation theorems that gave significantly better results; their proof techniques are quite distinct from ours, but I think it is fair to say that they might not have known to try to prove such quantitative theorems if the qualitative theorems of Tamar and myself had not already been in the literature. This seems to be the general pattern in the broader ecosystem of research in analysis: “soft” methods give the initial outline of what the true theory should look like, which then inspires later “hard” methods to come in and make the theory more efficient, more quantitative, and more powerful. Even if the soft results do not directly make progress on quantitative problems, they often show the way and help build up a general “big picture” intuition as to what type of quantitative results one should expect to be true, what their relative difficulties will be, and what type of techniques would be effective in attacking them.

There is a similar role played by many other tradeoffs in analysis, in which results in weaker regimes yield insight on the contours of the problems in stronger regimes. In the results in this current blog post, the main tradeoff here is between “almost all” results and “all” results, which I have already discussed in previous comments. Other tradeoffs include perturbative vs. non-perturbative regimes, high-regularity data vs. low-regularity data, non-uniform bounds vs. uniform bounds, low dimension vs. high dimension, toy model equations vs. physically realistic equations, discrete vs. continuous (or vice versa), non-Archimedean vs. Archimedean domains, constant coefficients vs. variable coefficients, ineffective vs. effective bounds, etc., etc.. The “horizontal” progress of exploring how a theory changes as one varies these parameters, when viewed narrowly, may not appear at first to make direct “vertical” progress on attacking the original problems that motivate that theory, but when viewed more broadly, this horizontal exploration often generates very valuable indirect progress, for instance by generating useful toy models of these problems as a test bed for intuition and strategies (and in particular to generate key “vertical” breakthroughs that can then later be transferred horizontally back to the original problem).

1 January, 2020 at 3:57 pm

Gim TowersYou write way too well :)

2 January, 2020 at 10:58 am

AnonymousIs it really your name ?

7 January, 2020 at 8:25 am

E.xu (@Exu16749831)i did not think you to take this as big deal .. it was Intersection Of Deterministic Processes and Deterministic Inverse Processes With Sizes Of Steps fit in probabilistic pattern .. Collatz Process is Not Random Process .. if you can not Probabilistic Methods ..

7 January, 2020 at 8:27 am

E.xu (@Exu16749831)i saw you were trying to Factorize Characteristic Function .. Gap-Between-Two-Consecutive-Primes trick can not be used to prove Collatz Conjecture ..

29 January, 2020 at 11:57 pm

armchair speculationsRamsey theory as currently formulated is not all that quantitative to begin with. The functions of interest are so hard to compute or approximate (even very crudely) that gathering useful experimental data is impossible. I think it is safe to say that there are no credible conjectures on the true growth rate of most Ramsey-style problems or what quantities might control the problem.

It seems to me that this is inherent in considering arbitrary colorings and that some sort of order parameter(s) are missing from the story. e.g. the number of irregular pairs plays this role in Malliaris and Shelah’s analysis of the regularity lemma for graphs.

2 January, 2020 at 10:48 am

gregmonahangmailcomDr. Tao

An amateur mathematician, so be gentle.

This certainly isn’t a proof, but consider this approach.

Select a number N that is sufficiently small enough that the numbers 1-N can be inspected to show that they collapse to 1. Call this set of numbers S because they represent the current solution set.

Now consider the set of numbers 1-2N. The numbers 1-N are already in the solution set S. The even numbers between N+1 and 2N have a second number that is half their value and lands them in the solution space S which is solvable. The result is that all even numbers between N+1 to 2N are also in the solution space S. This implies that all even numbers are in the solution space S.

Every odd number in the range N+1 to infinity is multiplied by 3 and then added by 1. Any odd number multiplied by another odd number (like 3) yields an odd number. Adding 1 makes this second number an even number. We’ve already shown that all even numbers are in the solution space S. We’ve now shown that any odd number above N yields an even number that eventually yields 1.

2 January, 2020 at 11:15 am

AnonymousYour claim that all even numbers are in seems to be false (just try to write its proof …)

2 January, 2020 at 2:10 pm

michaelmrossYou know you can exclude “S”. You don’t need a single even number to yield 1 and yet generate every odd number in a sequence. You just restate the conjecture. Algorithmically, it’s trivial to demonstrate this:

Do

If Modop(n + 1, 4) = 0 Then

n = ((n + 1) * (3/2)) – 1

ElseIf Modop(n – 1, 8) = 0 Then

n = ((n – 1) * (3/4)) + 1

Else

n = (n – 1) * (1/4)

End If

Loop

2 January, 2020 at 7:28 pm

Rason LeeGreetings from Singapore. I wrote a computer programme in javascript to group starting numbers N by their orbits’ upper bound sequence should there be at least one other matching, if not, by their upper bound values (as far as I observed, all numbers group by these two variables). Running the programme for up to N = 10 Million, I further observed the trend that numbers temporarily grouped by their upper bound values will eventually fall into a collection based on their upper bound sequence. The trend of matching density in log scale is as follow –

Percentage of non-matching sequences:

…up to 10: 4 / 4 = 100%

…up to 100: 15 / 49 = 30.6%

…up to 1,000: 222 / 482 = 46%

…up to 10,000: 540 / 3,821 = 14%

…up to 100,000: 550 / 34,622 = 1.59%

…up to 1,000,000: 548 / 343,839 = 0.159%

…up to 10,000,000: 544 / 3,427,576 = 0.0159%

Prima facie is that the resultant percentage oscillates (wobbles) to an approximately steady state of ×0.1 per decade, while the absolute number of non-matching sequences appears to decrease after 100,000. Suppose the number of non-matching sequences reaches and remains at 0, then all possible orbits’ upper bound sequence would have logically been identified. Hence, I believe with greater computing power (which I have not), it can be superficially/ergodically concluded that all numbers will eventually fall into a convergent orbit by an underlying upper bound sequence pattern that can be extrapolated to infinity, despite the formal mathematical relationship between the orbits being unknown.

More of my thoughts in the following Facebook post where I included in the comments a maze analogy and proof of no periodic orbit for N > 1 – https://www.facebook.com/iplaytherecorder/posts/10157656812184519

p/s I started on the problem from scratch a week ago without knowledge of prior art, thus I’m not sure if I have used the right jargons or made any new insights. Pedagogical-wise, my bias is towards explaining things like I’m fresh out of high school, so as to better promote STEM education and interest in related innovation to the general public.

Thanks for reading and best regards.

2 January, 2020 at 7:48 pm

Rason Leepp/s Append below sample outputs of my javascript programme to clarify what I termed as “upper bound sequence” and “upper bound value” –

Note: sequence ‘x’ denotes (×3+1) and ‘d’ denotes ÷2

Upper bound sequence/value of odd numbers up to 77 –

Starting numbers with upper bound sequence xxdx: 3,11,19,35,43,51,67,75

Starting numbers with upper bound sequence x: 5,13,17,21,29,33,37,45,49,53,61,65,69,77

Starting numbers with upper bound sequence xxdxxdxdx: 7,23

Starting numbers with upper bound sequence xxddxdx: 25,57

Starting numbers with upper bound value 52: 9

Starting numbers with upper bound value 160: 15

Starting numbers with upper bound value 9232: 27,31,41,47,55,63,71,73

Starting numbers with upper bound value 304: 39,59

Percentage of non-matching sequences: 12/38 = 31.6%

Upper bound sequence/value of odd numbers up to 79 –

Starting numbers with upper bound sequence xxdx: 3,11,19,35,43,51,67,75

Starting numbers with upper bound sequence x: 5,13,17,21,29,33,37,45,49,53,61,65,69,77

Starting numbers with upper bound sequence xxdxxdxdx: 7,23

Starting numbers with upper bound sequence xxdxxdxdxxdxdxdx: 15,79

Starting numbers with upper bound sequence xxddxdx: 25,57

Starting numbers with upper bound value 52: 9

Starting numbers with upper bound value 9232: 27,31,41,47,55,63,71,73

Starting numbers with upper bound value 304: 39,59

Percentage of non-matching sequences: 11/39 = 28.2%

3 January, 2020 at 1:03 pm

La conjetura 3x + 1 está cerca de resolverse | – Juegos Online Paraguay[…] escribe en su blog: «estamos ante una situación en donde parece haber una gran brecha entre «casi […]

3 January, 2020 at 4:58 pm

La conjetura 3x + 1 está cerca de resolverse - Comunidad Informativa[…] escribe en su blog: «estamos ante una situación en donde parece haber una gran brecha entre «casi todos» y […]

3 January, 2020 at 7:01 pm

La conjetura 3x + 1 está cerca de resolverse - Descargas Noticias y todo[…] escribe en su blog: «estamos ante una situación en donde parece haber una gran brecha entre «casi […]

5 January, 2020 at 12:31 pm

Rason LeeCorrection to above trend analysis due to a mistake in array sizing. Further tallied inter-decade matching rate and concluded similar, though on a different premise. It is observed that overall matching appears to tend to 100% still, however the graph is more likely to resemble underdamping throughout, and perhaps perpetually. Hence the eventual phenomenon of “almost all orbits” could be an effect of point sampling bobbing at 100%, i.e. an infinite number of upper bound sequences exists, but the matching trend towards and about 100% necessarily implies that all orbits are bounded. Tally outputs as follow –

Percentage of non-matching upper bound sequences for odd numbers up to 100 = 15 / 49 = 30.6%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 3 / 4 = 75.0%;

Percentage of matching upper bound sequences from above 10th percentile = 29 / 44 = 65.9%.

Percentage of non-matching upper bound sequences for odd numbers up to 1,000 = 239 / 499 = 47.9%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 3 / 15 = 20.0%;

Percentage of matching upper bound sequences from above 10th percentile = 215 / 449 = 47.9%.

Percentage of non-matching upper bound sequences for odd numbers up to 10,000 = 1,252 / 4,999 = 25.0%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 32 / 239 = 13.4%;

Percentage of matching upper bound sequences from above 10th percentile = 3,386 / 4,499 = 75.3%.

Percentage of non-matching upper bound sequences for odd numbers up to 100,000 = 8,363 / 49,999 = 16.7%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 245 / 1,252 = 19.6%;

Percentage of matching upper bound sequences from above 10th percentile = 37,150 / 44,999 = 82.6%.

Percentage of non-matching upper bound sequences for odd numbers up to 1,000,000 = 62,924 / 499,999 = 12.6%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 1,826 / 8,363 = 21.8%;

Percentage of matching upper bound sequences from above 10th percentile = 390,559 / 449,999 = 86.8%.

Percentage of non-matching upper bound sequences for odd numbers up to 10,000,000 = 499,887 / 4,999,999 = 10.0%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 15,856 / 62,924 = 25.2%;

Percentage of matching upper bound sequences from above 10th percentile = 4,024,211 / 4,499,999 = 89.4%.

Percentage of non-matching upper bound sequences for odd numbers up to 100,000,000 = 4,009,615 / 49,999,999 = 8.02%;

Percentage of non-matching upper bound sequences from 10th percentile that eventually found match = 109,241 / 499,887 = 21.9%;

Percentage of matching upper bound sequences from above 10th percentile = 41,190,871 / 44,999,999 = 91.5%.

16 January, 2020 at 12:57 am

Pedro BizarroI think I found a method to look for values that of a cycle other than 4.2.1

What I did was analyze the “inverse function”. From here I saw that the values obtained can be seen as a “chain” that has certain properties.

Then I considered what numbers could form a cycle

By analyzing it in this way, I could remove as numbers that form a cycle to the numbers multiple of 3; Then, considering that there is some other cycle than 4,2,1, I began to analyze which numbers could be those of greater value and of less value.

I could find that the smallest number within the cycle of this chain must be of the form 12n-1 or 12n-5; By doing more operations, I was able to reduce the numbers to those of the form 24n-1,24n-17,48n-5 or 48n-37. You can reduce the numbers further, but it is a bit difficult to do it manually.

When searching for the largest number, I found that the largest number should be of the form 18n-1 or 18n-7. I could reduce it to the 36n-7 or 36n-19 form. I continued to operate it and could reduce it to the 108n-91,108n-79,108n-55 or 108n-7 form.

19 January, 2020 at 12:02 am

Pedro BizarroI have analyzed my method again and discovered that the only cycle that exists is 4.2.1

First I considered that there is a different cycle than 4.2.1, this cycle must have a maximum and minimum odd number

When analyzing the maximum odd number, I discovered that it must have the form 36n-19 or 36n-7

Using the collatz function, I discovered that one of the following numbers within the cycle should have the form 27n-14 or 27n-5

When using the “inverse function”, I discovered that the previous odd number within the cycle must have the form 24n-13 or 24n-5

Since these numbers are within the cycle, the numbers of the form 27n-14 or 27n-5 must reach the numbers of the form 24n-13 or 24n-5 using only the collatz function (multiply 3, add 1 and divide by one power of 2 indefinitely) which is clearly impossible

I did all this analysis graphically, but here in the comments I can’t put the graphics

19 January, 2020 at 12:03 pm

AnonymousSuch analysis should be written in a rigorous (non-graphical) form.

21 January, 2020 at 6:04 am

gabekhan7I apologize if these are obvious or obviously wrong questions, but I was wondering if there is a quantitative version of the “almost global in time” estimates. In other words, given a slow growing function f and a “generic” number N (so that ), can you give any sense of how large k needs to be so that . In other words, is there some sense of how many iterations of the Collatz map you need "on average" to get below some threshold. I guess this would depend on the particular choice of f, and would seem to get larger the slower that f grows.

As a follow up question, can your result can be combined with the Krasikov-Lagarias result to get better estimates on how many numbers reach 1? This is terribly naive, and so must be wrong, but if there is a set S of density whose Collatz iterations can be shown to reach one, and the "generic" Collatz map reaches values much smaller than N, it seems like it might be possible to get some lower bounds on how many orbits hit S (and thus also go to one). Is there a reason that S and orbits of the Collatz map do not collide in a naive way?

21 January, 2020 at 11:01 am

Terence TaoThe arguments in my paper allow one to take . With more effort it may be possible to obtain the more precise value (or if one uses Syracuse iterations instead of Collatz (this limiting value of roughly corresponds to the infinite time limit for autonomous PDE).

The arguments in my paper are unable to “see” anything going on in subsets of that are sparser than about in cardinality, so in particular would not be able to interact with the Krasikov-Lagarias set with the current level of bounds. Perhaps in the future one could potentially imagine the error terms in the almost all results and the lower bounds on the preimage results improving to the extent that they can start working with each other, although this possibility looks somewhat remote. However, there is a link between KL type bounds and uniform distribution of the Syracuse random variables in my paper, in that a (currently unproven) equidistribution hypothesis on the former can lead to improvements on the latter (in particular, to replace the 0.84 exponent by any exponent less than 1); I may detail this in a separate blog post.

31 January, 2020 at 5:29 pm

Michael M. RossI haven’t found a clear definition of a Syracuse function. I immediately think of any case where n>1 for 3x+n. Does this qualify? These Collatz-type functions produce obvious counterexamples to 3x+1 on the question of cyclicality. For example, taking 3x+17 for 27 there is a 21-step loop beginning with 41 in the odd-only sequence (using my own odd-only function) and a 49-step loop beginning with 140 using the conventional even-odd function. (They are equivalent.)

I notice that complex cycles occur only where it’s possible for the common differences of odd input-output numbers to be zero. That requires what I’ll call a zero-point equilibrium. What is that? It’s simply the n in 3x+n. It means that for 3x+17 the zero point is 17 – and for 3x+1 it’s 1, of course. For 3x+17, common differences have inverse pairs: +14, −14 and −20, +20. For the 3x+17 loop for 27, the addition of common differences yields 0 (+368-368). Such inverse-pair symmetry can never exist for 3x+1.

3 February, 2020 at 11:18 pm

IngoAIt is a little bit offtopic, but there is a random version of the Collatz problem where convergence to the limit set {1, 2, 4} is rather obvious and easy to prove:

(i) Like “in Collatz”, an odd number n is transformed to 3n+1.

(ii) For an even number n a random decision is made: with probability 1/2, n is divided by 2 (like in Collatz), but with the other 1/2, n is divided by 2 and 1 is subtracted from the outcome. Subsequent random decisions are made independently of each other.

The modification in (ii) makes sure that for each even n, the result is even again with probability 1/2.

4 leads either to 2 or to 1, both with probability 1/2.

The expected number of iterations until 1 is reached for the first time is c*log(n_0), where “magic” 4/3 occurs in c somehow.

25 January, 2020 at 3:58 pm

Equidistribution of Syracuse random variables and density of Collatz preimages | What's new[…] natural numbers obeys the Collatz conjecture. This is not yet established, although the results in my previous paper do at least imply that a positive density set of natural numbers iterates to an (explicitly […]

3 February, 2020 at 12:03 pm

Los primos de la conjetura de Collatz - La Ciencia de la Mula Francis[…] Tao, “The Collatz conjecture, Littlewood-Offord theory, and powers of 2 and 3,” What’s New, 25 Aug 2011; Terence Tao, “Almost all Collatz orbits attain almost bounded values,” What’s […]